CRL Matte Black, Brushed Stainless Steel, Polished Stainless Steel, Brushed Bronze or Satin Brass Premium Brixen Series Two Door Bypass Sliding Shower Door System with Concealed Hardware

• Beautifully Enhanced Aesthetics Including Concealed Mounting Hardware

• System Features Two Bypassing Sliding Doors

• Specially Designed Roller Bearings for Quiet Door Movement

• Available in a variety of Beautiful Finishes

The Premium Brixen Series Two Door Bypass Sliding Shower Door System utilizes a modern top roller fitting that features four rollers on each door for ease of sliding. It has beautiful fully concealed installation to provide unmatched aesthetics. This quiet, smooth sliding system is made of high quality stainless steel, thus ensuring easy opening and closing of the door. The Brixen Series Sliding Shower Door System is versatile in design, able to adapt to full standing showers or above bathtubs. A 90 Degree Accessory Kit may be purchased separately for use with 90 degree return panels. Available in polished stainless steel, brushed stainless steel, matte black, brushed bronze, and satin brass. The Brixen Sliding System will work with 3/8" or 5/16" (10 or 8 mm) thick tempered glass (not included).

Each Brixen Kit includes the following:

1 - 73" (1854 mm) Length Stainless Header Bar

8 - Stainless Steel Rollers

2 - Stoppers

2 - Track Holder Fittings for Wall

1 - Bottom Guide

2 - 24" (610 mm) Stainless Towel Bars

2 - 80" (2.03 m) Clear L-Jamb

2 - 40" (1016 mm) Bottom Sweep With Drip Rail

1 - Tool Kit

SPECIFICATIONS:

Glass Thickness Range: 5/16" to 3/8" (8 to 10 mm) Tempered Safety Glass (Not Included)

Material: Stainless Steel

Maximum Sliding Door Size: Do Not Exceed Either 37" (940 mm) Wide or 84 Pounds (38 kg)

Glass Fabrication: Holes Required in Both Doors

Maximum Door Height (Inches): 80" (2032 mm)

CRL Matte Black, Brushed Stainless Steel, Polished Stainless Steel, Brushed Bronze or Satin Brass  Premium 180 Degree Cavoli Series Sliding System

• Beautifully Enhanced Aesthetics Including Concealed Mounting Hardware

• System Features One Sliding Door and One Fixed Panel

• Specially Designed Roller Bearings for Quiet Door Movement

• Fixed and Sliding Panels May Be Reversed for Installation

• For 5/16" to 3/8" (8 to 10 mm) Thick Tempered Glass (Not Included)

• U-Channel or Glass Clamps for Fixed Panel Must Be Ordered Separately

Our CRL Premium 180 Degree Cavoli Series Sliding System has an entirely different look from traditional sliding systems. The use of minimal hardware with concealed installation provides a frameless look that gives the enclosure an almost floating appearance. Specially designed roller bearings allow for quiet and easy opening and closing of the door. One sliding panel and one fixed panel make the Premium Cavoli Series both practical and beautiful.

The Deluxe Kit Includes:

One - 78-3/4" (2 m) Length Header Bar

Four - Rollers

One - Stopper

Two - Track Holder Fittings for Wall

Two - Track Holder Fittings for Fixed Panel

One - Thru-Glass Pull

One - Door Guide

One - 85" (2.16 m) Clear L-Jamb

SPECIFICATIONS:

Glass Thickness Range: 5/16" to 3/8" (8 to 10 mm) Tempered Safety Glass (Not Included)

Material: Stainless Steel

Maximum Door Size: Do Not Exceed Either 37" (939.9 mm) Wide or 98 lbs. (44.5 kg)

Fabrication: Holes Required in Both Door and Fixed Panel
A 90 Degree Accessory Kit may be purchased separately for use with 90 degree return panels. Available in polished or brushed stainless steel, matte black, brushed bronze, or satin brass finishes, the Premium Cavoli Series Sliding System will work with 3/8" or 5/16" (10 or 8 mm) thick tempered glass (not included). Do not exceed either 37" (939.9 mm) Wide or 98 Pounds (44.5 kg)for the door size. Glass fabrication is required in both the door and fixed panel.

Product Warning:

U-Channel or Glass Clamps for Fixed Panel Must Be Ordered Separately.

Brass Finish Advisory:

Although durable, brass is prone to oxidation. It can give brass and brass finishes a tarnished look, regardless of how the hardware is initially packaged or stored. For more information, view the Brass Finish Disclaimer found in the Technical References section below.

CRL Matte Black, Brushed Stainless Steel, Polished Stainless Steel, Brushed Bronze or Satin Brass  Complete 180º Premium Colonia Series Sliding System

• Beautifully Enhanced Aesthetics Including Concealed Mounting Hardware

• System Features One Sliding Door and One Fixed Panel

• Circular Header and Rollers Provide Symmetrical Aesthetics

• Handle or Knob for Door Glass Ordered Separately

• Accommodates 1/2" or 3/8" (12 or 10 mm) Thick Tempered Safety Glass (Not Included)

• Glass Clamps or U-Channel for Fixed Panel Ordered Separately

The circular shaped Header and the round Rollers of the Premium Colonia Series Sliding Door System are the perfect complement to each other. They help provide a luxurious sliding shower door system and a soft décor. The use of minimal hardware with concealed installation hardware lends itself to the popular modern sliding shower door systems by showing more glass, and no hardware. These quality Rollers assure quiet door travel, and make the door easy to slide. The Colonia Series Sliding System accommodates 1/2"or 3/8" (12 or 10 mm) thick tempered safety glass (not included), and the system allows that the fixed and sliding panels are reversible for installation as desired. The Colonia Series Sliding Door System is available in a choice of polished stainless steel, brushed stainless steel, matte black, brushed bronze, or the popular satin brass finish.

STANDARD 180 DEGREE KIT INCLUDES:One - 78" (1981 mm) Length of Header Bar

Four - Rollers

One - Stopper

Two - Wall Mount Fittings

Two - Track Holder Fittings for Fixed Panel

One - Bottom Guide (includes inserts for both 1/2" and 3/8" (12 and 10 mm) Glass)

Two - 40" (1016 mm) Bottom Sweeps with

Drip Rail (one for 3/8" (10 mm) and one for 1/2" (12 mm)

One - 80" (2032 mm) Clear L-Jamb

NOTE: Customer to supply choice of Handle or Knob for door, and Glass Clamps or U-Channel for fixed panel.

SPECIFICATIONS:

Material: Stainless Steel

Glass Thickness: 1/2" or 3/8" (12 or 10 mm) - Not Included

Maximum Door Size: 36" (914 mm) wide or 100 lbs (45 kg) - Do not exceed either width or weight.

Glass Fabrication Required for Both Door and Fixed Panel

Stainless Steel Advisory:

Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.

CRL Matte Black, Brushed Stainless Steel, Polished Stainless Steel, Brushed Bronze or Satin Brass Complete 180º Premium Tofino Series Sliding System

• Beautifully Enhanced Aesthetics Including Concealed Mounting Hardware

• System Features One Sliding Door and One Fixed Panel

• Fixed and Sliding Panels May Be Reversed for Installation

• For 5/16" to 3/8" (8 to 10 mm) Thick Tempered Glass (Not Included)

• Glass Clamps or U-Channel for Fixed Panel Ordered Separately

Our CRL 180 Degree Premium Tofino Series Sliding System has an entirely different look from traditional sliding systems. The use of minimal hardware with concealed installation hardware provides a frameless look that gives the enclosure an almost floating appearance. Specially designed roller bearings allow for quiet and easy opening and closing of the door. One sliding panel and one fixed panel make the Tofino Series both practical and beautiful.

Stainless Steel Advisory:

Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.

CRL Matte Black, Brushed Stainless Steel, Polished Stainless Steel, Brushed Bronze or Satin Brass Deluxe 180 Degree Cambridge Series Two Door Bypass Sliding Shower Door System

• System Features Two Bypassing Sliding Doors

• Specially Designed Roller Bearings for Quiet Door Movement

• Available in Polished or Brushed Stainless, Brushed Bronze and Matte Black

The Cambridge Series Two Door Bypass Sliding Shower Door System utilizes a modern top roller fitting that features four rollers on each door for ease of sliding. This quiet, smooth sliding system is made of high quality stainless steel, thus ensuring easy opening and closing of the door. The Cambridge Series Sliding Shower Door System is versatile in design, able to adapt to full standing showers or above bathtubs. A 90 Degree Accessory Kit may be purchased separately for use with 90 degree return panels. Available in either polished stainless steel, brushed stainless steel, brushed bronze, or matte black. The Cambridge Sliding System will work with 3/8" or 5/16" (10 or 8 mm) thick tempered glass (not included).

Each Cambridge Kit includes the following:

1 - 73" (1854 mm) Length Stainless Header Bar

8 - Stainless Steel Rollers

2 - Stoppers

2 - Track Holder Fittings for Wall

1 - Bottom Guide

2 - 24" (610 mm) Stainless Towel Bars

2 - 80" (2.03 m) Clear L-Jamb

2 - 40"(1016 mm) Bottom Sweep With Drip Rail

1 - Tool Kit

SPECIFICATIONS:Glass Thickness Range: 5/16" to 3/8" (8 to 10 mm) Tempered Safety Glass (Not Included)

Material: Stainless Steel

Maximum Sliding Door Size: Do Not Exceed Either 37" (940 mm) Wide or 84 Pounds (38 kg)

Glass Fabrication: Holes Required in Both Doors

Maximum Door Height (Inches): 80" (2032 mm)

Brass Finish Advisory:

Although durable, brass is prone to oxidation. It can give brass and brass finishes a tarnished look, regardless of how the hardware is initially packaged or stored. For more information, view the Brass Finish Disclaimer found in the Technical References section below.

CRL Oil Rubbed Bronze, Brushed Nickel, Polished Chrome, Polished Brass Essence® Series Basic Sliding Shower Door Kit with Squared Corner Rollers

• Patents: U.S. 9,364,121; Canada 2,853,462; Australia 2012328876

• Headerless System Offers Frameless Look Both Vertically and Horizontally

• Bottom Rolling System has Integrated Height Adjustment

• Rollers Include Anti-Derail/Anti-Pinch Features

• For Use with Only 1/2" (12 mm) Thick Tempered Safety Glass

• Stocked in Four Popular Finishes

• Glass Brackets and Door Handle or Knob Sold Separately

The CRL Essence Series Basic Sliding Shower Door Kit with Squared Corner Rollers is a headerless system that offers a frameless appearance both vertically and horizontally. Smooth and quiet operation is the cornerstone of the Essence Series. Water management is achieved horizontally via the use of the bottom track, and vertically with the use of our DK98L Clear Seal. The anti-derail/anti-pinch guard features of the squared corner shaped bottom rollers make them unique. For use with only 1/2" (12 mm) thick tempered safety glass (not included). Stocked in four popular finishes.

Kit Includes

Two - Bottom Rollers

One - Spanner Wrench for Roller Adjustment

One - Top Door Guide

One - 64" (1.63 m) Bottom Track

One - 98" (2.49 m) U-Channel

One - 98" (2.49 m) Plastic L-Seal

One - SDCEC12 End Cap for Channel

One - 1/16" (1.6 mm) Neoprene Setting Block

NOTE: Glass Brackets, Handle or Knob, and Other Accessories Sold Separately.

Product Warning:

Maximum Door Size: Must not exceed 84" (2.13 m) in height or 127 lbs. (57.6 kg).

GE90S9(Square) or CL90S(Round) Wall Clamps must be used on fixed panel and are sold separately. 

CRL Oil Rubbed Bronze, Brushed Nickel, Polished Chrome, Polished Brass 60" Hydroslide 180 Degree Sliding Shower Door Kit

• Clean, Sleek Lines Make it an Excellent Design for Compact Areas

• For Use with 5/16" to 3/8" (8 to 10 mm) Monolithic Tempered Glass

• Available in Four Stock Finishes, Custom Finishes Available

• Custom Sized Units Available by Special Order

• 180 Degree Installation is One Fixed Panel and One Door

CRL Hydroslide Sliding Shower Door Kits were designed for full standing showers or above bathtubs. The Hydroslide System can accommodate a wide range of shower designs with fixed glass panels on either end, or both sides at 90 or 180 degrees. The Hydroslide System also accommodates the option of floor-to-near-ceiling glass panels with a sliding door.

Hydroslide Sliding Shower Door Kits feature the latest European 'all-glass' look. Kits are available in either 60" (1.52 m) or 84" (2.13 m) widths. Installers can cut the width to size, and height is optional as long as the sliding door glass weighs less than 88 lbs. (40 kg). The 180 Degree Wall-to-Wall Installation only requires the 180 Degree Standard Kit for the installation.

60" (1.52 m) 180 Degree Kit Consists of:

One - Sliding Glass Door Upper Track

Two - Hangers for Sliding Glass Door

Two - Sliding Glass Door Rollers

Two - Sliding Glass Door Roller Stops

One - Sliding Glass Door Floor Guide (HYD03)

Two - 90 Degree Wall-to-Upper Track Connectors

Two - 180 Degree Glass-to-Sliding Track Connectors

One - 36" (.91 m) Half-Round SDT980 Threshold

One - 95" (2.41 m) DK98L L-Seal for Wall 

Brass Finish Advisory:

Although durable, brass is prone to oxidation. It can give brass and brass finishes a tarnished look, regardless of how the hardware is initially packaged or stored. For more information, view the Brass Finish Disclaimer found in the Technical References section below.

CRL Polished Chrome or Brushed Nickel 180º with Square Style Clamp - 84"

• Featuring New Softbrake Braking System

• Use Monolithic Tempered Glass

• Hardware for One Sliding Door and One Fixed Panel

• Concealed Overhead Roller Design

• Accommodates Door Weighing Up to 176 Pounds (80 kg)

• 90º Bracket Sold Separately

The CRL Cabo Soft Slide Sliding Door System is the first CRL system to offer the Softbrake Braking System, ensuring you do not have to worry about the door slamming open or closed. Sofbrake cushions the opening of the door, and is concealed inside the header. Softbrake engages in the last 4" (100 mm) of door travel, preventing the glass from impacting the frame or adjacent glass panel.

The Cabo Series offers both Rounded Clamp Style and Squared Clamp Style designs, to match most any modern decor.

Available in several finishes, and suitable for use with 5/16", 3/8", or 1/2" (8, 10, or 12 mm) thick tempered safety glass (not included). Glass fabrication is required. 

CRL Brushed Nickel, Brite Gold, Brite Anodized, Oil Rubbed Bronze 60" x 72" Suite "EK" Series Shower Door Kit

• Designed for Use Only With 1/4" (6 mm) Thick Glass

• Use Monolithic Tempered Glass

• Low Profile 2-9/16" (65 mm) Header is Reversible So You Can Expose Either the Curved or Flat Side

• Clamp-On Hanger Bracket Eliminates Glass Drilling

• Offered Only in Inline Units With Metal Side Jambs

• Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze in Two Stock Sizes

• Custom Size Units Also Available

The "EK" Suite Series Frameless Sliding Shower Door Kit for 1/4" (6 mm) thick glass provides an alternative design and mounting method to our Deluxe Cottage Series Sliders. The Hanger Bracket is a cost-reducing device, as it clamps directly onto the glass and eliminates the need for drilling holes (set screws only). The brackets allow for smooth, quiet operation and long service life at a lower cost.

The specially designed Header is only 2-9/16" (65 mm) tall. This reduces the profile of the top metal, and allows more of the frameless 'all-glass' look. It is reversible so the customer has the choice of using the gently curved side, or the flat side with top and bottom edge bevels.

The "EK" Suite Series is available exclusively with metal side jambs, does not offer the clear jamb system, and is available only for inline units. Kits with fixed panels are not available.

Two popular stock sizes are available: 60" W x 60" H (1.52 x 1.52 m) and 60" W x 72" H (1.52 x 1.83 m). Custom inline sizes are also available, but not to exceed 60" (1.52 m) wide or 72" (1.83 m) tall. The "EK" Suite Series comes in four popular finishes. 

CRL Brushed Stainless Steel, Polished Stainless Steel, Matte Black Bristol Series Slider 180 Degree

• System Features One Sliding Door and One Fixed Panel

• Fixed and Sliding Panels May Be Reversed for Installation

• U-Channel or Glass Clamps for Fixed Panel Must Be Ordered Separately

• For 5/16" to 3/8" (8 to 10 mm) Thick Tempered Glass (Not Included)

Our CRL 180 Degree Bristol Series Sliding System has an entirely different look from traditional sliding systems. The use of minimal hardware provides a frameless look that gives the enclosure an almost floating appearance. Specially designed roller bearings allow for quiet and easy opening and closing of the door. One sliding panel and one fixed panel make the Bristol Series both practical and beautiful. 

Stainless Steel Advisory:

Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.

CRL Matte Black, Brushed Stainless Steel, Polished Stainless Steel, Brushed Bronze or Satin Brass Complete 180º Crescent Series Sliding System

• System Features One Sliding Door and One Fixed Panel

• Quality Roller Bearings Assure Quiet Door Movement

• Circular Header and Rollers Provide Symmetrical Aesthetics

• Polished Stainless, Brushed Stainless, and Matte Black Finishes

• Handle or Knob for Door Glass Ordered Separately

• Glass Clamps or U-Channel for Fixed Panel Ordered Separately

• Accommodates 1/2" or 3/8" (12 or 10 mm) Thick Tempered

• Safety Glass (Not Included)

The circular shaped Header and the round Rollers of the Crescent Series Sliding Door System are the perfect complement to each other. They help provide a luxurious sliding shower door system and a soft décor. The use of minimal hardware lends itself to the popular modern sliding shower door systems by showing more glass, and less hardware. These quality Rollers assure quiet door travel, and make the door easy to slide. The Crescent Series Sliding System accommodates 1/2"or 3/8" (12 or 10 mm) thick tempered safety glass (not included), and the system allows that the fixed and sliding panels are reversible for installation as desired. The Crescent Series Sliding Door System is available in a choice of polished stainless steel, brushed stainless steel, or the new popular matte black finish.

STANDARD 180 DEGREE KIT INCLUDES:One - 78" (1981 mm) Length of Header Bar

Four - Rollers

One - Stopper

Two - Wall Mount Fittings

Two - Track Holder Fittings for Fixed Panel

One - Bottom Guide (includes inserts for both 1/2" and 3/8" (12 and 10 mm) Glass)

Two - 40" (1016 mm) Bottom Sweeps with

Drip Rail (one for 3/8" (10 mm) and one for 1/2" (12 mm)

One - 80" (2032 mm) Clear L-Jamb

NOTE: Customer to supply choice of Handle or Knob for door, and Glass Clamps or U-Channel for fixed panel.

SPECIFICATIONS:

Material: Stainless Steel

Glass Thickness: 1/2" or 3/8" (12 or 10 mm) - Not Included

Maximum Door Size: 36" (914 mm) wide or 100 lbs (45 kg) - Do not exceed either width or weight.

Glass Fabrication Required for Both Door and Fixed Panel

CRL Matte Black, Brushed Stainless Steel, Polished Stainless Steel, Brushed Bronze or Satin Brass Deluxe 180 Degree Serenity Series Sliding System

• System Features One Sliding Door and One Fixed Panel

• Use Monolithic Tempered Glass

• Specially Designed Roller Bearings for Quiet Door Movement

• Fixed and Sliding Panels May Be Reversed for Installation

• For 5/16" to 3/8" (8 to 10 mm) Thick Tempered Glass (Not Included)

• U-Channel or Glass Clamps for Fixed Panel Must Be Ordered Separately

• Available in Several Architectural Finishes

Our CRL Deluxe 180 Degree Serenity Series Sliding System has an entirely different look from traditional sliding systems. The use of minimal hardware provides a frameless look that gives the enclosure an almost floating appearance. Specially designed roller bearings allow for quiet and easy opening and closing of the door. One sliding panel and one fixed panel make the Deluxe Serenity Series both practical and beautiful.

The Deluxe Kit Includes:

One - 78-3/4" (2 m) Length Header Bar

Four - Rollers

One - Stopper

Two - Track Holder Fittings for Wall

Two - Track Holder Fittings for Fixed Panel

One - Thru-Glass Pull

One - Door Guide

One - 85" (2.16 m) Clear L-Jamb

SPECIFICATIONS:

Glass Thickness Range: 5/16" to 3/8" (8 to 10 mm) Tempered Safety Glass (Not Included)

Material: Stainless Steel

Maximum Door Size: Do Not Exceed Either 30" (762 mm) Wide or 88 Pounds (40 kg)

Fabrication: Holes Required in Both Door and Fixed Panel
A 90 Degree Accessory Kit may be purchased separately for use with 90 degree return panels. Available in either polished stainless steel or brushed stainless steel, the Deluxe Serenity Series Sliding System will work with 3/8" or 5/16" (10 or 8 mm) thick tempered glass (not included). Do not exceed either 30" (762 mm) or 88 pounds (40 kg) for the door size. Glass fabrication is required in both the door and fixed panel.

Product Warning:

U-Channel or Glass Clamps for Fixed Panel Must Be Ordered Separately.

CRL Translucent Vinyl Bulb Seal 5/32" Gap

• Most Popular Use is for Hinge Side Seal

• Bulb Compresses When Door Closes

• Use Monolithic Tempered Glass

• Now Available With or Without Pre-Applied Clear Very Hi-Bond Tape

Translucent Vinyl Bulb Seal SDTJ can be used on inswing or outswing doors. Cat. No. SDLB closes gaps from 3/16" (5 mm) to 3/8" (10 mm). Cat. No. SDTB closes gaps from 5/32" (4 mm) to 7/32" (5.6 mm). Cat. No. SDTJ closes gaps from 1/8" (3 mm) to 5/32" (4 mm). Adhere rigid flat base to glass edge or wall using our Clear Very Hi-Bond Tape. 

CRL Translucent Vinyl Bulb Seal 5/32" Gap with Pre-Applied Tape

• Pre-Applied VHB Tape for Easy Installation

• Labor Savings Due to Pre-Application of Tape

• Use Monolithic Tempered Glass

Our popular CRL SDTJT2 Bulb Seal is now available with pre-applied VHB Tape, for ease of installation and substantial labor savings. Simply peel back the tin tape lining to expose the clear tape. Popular 95" (2.41 m) stock lengths 

CRL Translucent Vinyl Bulb Seal 7/32" Gap

• Most Popular Use is for Hinge Side Seal

• Bulb Compresses When Door Closes

• Use Monolithic Tempered Glass

• Now Available With or Without Pre-Applied Clear Very Hi-Bond Tape

Translucent Vinyl Bulb Seal SDTB can be used on inswing or outswing doors. Cat. No. SDLB closes gaps from 3/16" (5 mm) to 3/8" (10 mm). Cat. No. SDTB closes gaps from 5/32" (4 mm) to 7/32" (5.6 mm). Cat. No. SDTJ closes gaps from 1/8" (3 mm) to 5/32" (4 mm). Adhere rigid flat base to glass edge or wall using our Clear Very Hi-Bond Tape. 

CRL Translucent Vinyl Bulb Seal 7/32" Gap with Pre-Applied Tape

• Pre-Applied VHB Tape for Easy Installation

• Labor Savings Due to Pre-Application of Tape

• Use Monolithic Tempered Glass

Our popular CRL SDTBT2 Bulb Seal is now available with pre-applied VHB Tape, for ease of installation and substantial labor savings. Simply peel back the tin tape lining to expose the clear tape. Popular 95" (2.41 m) stock lengths 

CRL Translucent Vinyl Bulb Seal 3/8" Gap

• Most Popular Use is for Hinge Side Seal

• Bulb Compresses When Door Closes

• Use Monolithic Tempered Glass

Translucent Vinyl Bulb Seal SDLB can be used on inswing or outswing doors. Cat. No. SDLB closes gaps from 3/16" to 3/8" (5 to 10 mm). Cat. No. SDTB closes gaps from 5/32" to 7/32" (4 to 5.6 mm). Cat. No. SDTJ closes gaps from 1/8" to 5/32" (3 to 4 mm). Adhere rigid flat base to glass edge or wall using our Clear Very Hi-Bond Tape. 

CRL Translucent Vinyl Bulb Seal 3/8" Gap with Pre-Applied Tape

• Most Popular Use is for Hinge Side Seal

• Bulb Compresses When Door Closes

• Use Monolithic Tempered Glass

Translucent Vinyl Bulb Seal SDLBT2 can be used on inswing or outswing doors. Cat. No. SDLB closes gaps from 3/16" to 3/8" (5 to 10 mm). Cat. No. SDTB closes gaps from 5/32" to 7/32" (4 to 5.6 mm). Cat. No. SDTJ closes gaps from 1/8" to 5/32" (3 to 4 mm). Adhere rigid flat base to glass edge or wall using our Clear Very Hi-Bond Tape.

CRL Polycarbonate H-Jamb 180 Degree for 3/8" Glass

• Our Most Popular 180 Degree Inline Seal

• Snaps Onto Fixed Panel

• For Glass-to-Glass Applications

• Suggested Gap: 3/16" (4.7 mm)

This CRL Clear 'H' Jamb P380HJ is for use on 180 degree inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side, or onto the door with the lip on the hinge side. Leaves a clear appearance while serving as a functional seal. Entire 'H' Jamb is made of hard polycarbonate. 

CRL Polycarbonate H-Jamb 180 Degree for 1/2" Glass

• Our Most Popular 180 Degree Inline Seal

• Snaps Onto Fixed Panel

• For Glass-to-Glass Applications

• Suggested Gap: 3/16" (4.7 mm)

This CRL Clear 'H' Jamb P120HJ is for use on 180 degree inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side, or onto the door with the lip on the hinge side. Leaves a clear appearance while serving as a functional seal. Entire 'H' Jamb is made of hard polycarbonate. 

CRL 'Y' Jamb Seal with Soft Leg for 3/8" Glass

• Soft Vinyl Single Leg for Quieter Door Closure

• Snaps Onto Fixed Panel

• For Glass-to-Glass Applications

• Suggested Gap: 3/16" (4.7 mm)

This CRL 'Y' Jamb Seal with Soft Leg PCC10 is for use on 180 degree inline glass-to-glass applications. Snaps onto the fixed panel with the lip on the strike side. The 'U' portion is rigid, and the single leg is soft to cushion the closing. Snaps onto fixed panel inline with the door. 

CRL 'Y' Jamb Seal with Soft Leg for 1/2" Glass

• Soft Vinyl Single Leg for Quieter Door Closure

• Snaps Onto Fixed Panel

• For Glass-to-Glass Applications

• Suggested Gap: 3/16" (4.7 mm)

This CRL 'Y' Jamb Seal with Soft Leg PCC12 is for use on 180 degree inline glass-to-glass applications. Snaps onto the fixed panel with the lip on the strike side. The 'U' portion is rigid, and the single leg is soft to cushion the closing. Snaps onto fixed panel inline with the door. 

CRL Polycarbonate Strike and Door H-Jamb with Vinyl Insert 180 Degree for 3/8" Glass

• Vinyl Insert Included for P180SDJ and P120SDJ

• Snaps Onto Glass

• For Glass-to-Glass Applications

• Vinyl Insert for Added Coverage

• Suggested Gap: 3/16" (4.7 mm)

• Use Monolithic Tempered Glass

This CRL Clear 180 degree Polycarbonate Strike and Door H-Jamb with Vinyl Insert P180SDJ is snapped onto the fixed panel running inline with the door. P180SDJ and P120SDJ contain vinyl insert V600CSG. P1801P is all one piece Contains clear vinyl insert. Sturdiness of this seal makes it one of our better jambs at reducing water leakage for inline installations. 

CRL Polycarbonate Strike and Door H-Jamb with Vinyl Insert 180 Degree for 1/2" Glass

• Vinyl Insert Included for P180SDJ and P120SDJ

• Snaps Onto Glass

• For Glass-to-Glass Applications

• Vinyl Insert for Added Coverage

• Suggested Gap: 3/16" (4.7 mm)

• Use Monolithic Tempered Glass

This CRL Clear 180 degree Polycarbonate Strike and Door H-Jamb with Vinyl Insert P120SDJ is snapped onto the fixed panel running inline with the door. P180SDJ and P120SDJ contain vinyl insert V600CSG. P1801P is all one piece Contains clear vinyl insert. Sturdiness of this seal makes it one of our better jambs at reducing water leakage for inline installations. 

CRL Polycarbonate One Piece Strike and Door H-Jamb with Vinyl Insert 180 Degree for 3/8" Glass

• Vinyl Insert Included for P180SDJ and P120SDJ

• Snaps Onto Glass

• For Glass-to-Glass Applications

• Vinyl Insert for Added Coverage

• Suggested Gap: 3/16" (4.7 mm)

• Use Monolithic Tempered Glass

This CRL Clear 180 degree Polycarbonate Strike and Door H-Jamb with Vinyl Insert P1801P is snapped onto the fixed panel running inline with the door. P180SDJ and P120SDJ contain vinyl insert V600CSG. P1801P is all one piece Contains clear vinyl insert. Sturdiness of this seal makes it one of our better jambs at reducing water leakage for inline installations. 

CRL Translucent Vinyl Edge 'V' Seal for 1/4" Maximum Gap Without Tape

• Seals Gaps from 3/16" to 1/4" (5 to 6 mm)

• Now Available With or Without Pre-Applied Clear Very Hi-Bond Tape

• Used Only on Doors Swinging One Way

• Use Monolithic Tempered Glass

Our popular CRL Translucent 'V' Seal SDTS are used only on doors swinging one way to seal gaps from 3/16" to 1/4" (5 top 6 mm). Adhere 5/16" (8 mm) rigid leg to the glass edge or wall using our Clear Very Hi-Bond Tape. Door closes into soft vinyl leg. 

CRL Translucent Vinyl Edge 'V' Seal for 1/4" Maximum Gap With Tape

• Seals Gaps from 3/16" to 1/4" (5 to 6 mm)

• Now Available With or Without Pre-Applied Clear Very Hi-Bond Tape

• Used Only on Doors Swinging One Way

• Use Monolithic Tempered Glass

Our popular CRL Translucent 'V' Seal SDTST2 are used only on doors swinging one way to seal gaps from 3/16" to 1/4" (5 top 6 mm). Adhere 5/16" (8 mm) rigid leg to the glass edge or wall using our Clear Very Hi-Bond Tape. Door closes into soft vinyl leg. 

CRL Translucent Silicone Bulb Seal With Pre-Applied Tape

• Can be Used on Inswing and Outswing Doors

• 95" (2.41 m) Stock Length

• Use Monolithic Tempered Glass

• Adheres Using Pre-Applied Tape (White Backing)

This CRL Translucent Silicone Bulb Seal S1LBT2 can be used on inswing or outswing doors to close gaps from 1/16" to 3/16" (1.6 to 5 mm). Minimum order is five each.

NOTE: Adhere flat base to glass edge or wall using pre-applied tape. NOTE: Tape backing is white in color. 

CRL Translucent Vinyl Bulb Seal for 3/8" Glass

• 95" (2.41 m) Stock Length

• Can Be Used on Inswing and Outswing Doors

• Suggested Gap: 1/4" (6 mm)

• Use Monolithic Tempered Glass

The CRL Clear Polycarbonate 'U' with Bulb Attachment PCR10 is a versatile seal that can be mounted to the edge of a door or panel for a variety of installation configurations. The soft Bulb portion of the Seal allows doors to swing both in and out of the enclosure if desired. 

CRL Translucent Vinyl Bulb Seal for 1/2" Glass

• 95" (2.41 m) Stock Length

• Can Be Used on Inswing and Outswing Doors

• Suggested Gap: 1/4" (6 mm)

• Use Monolithic Tempered Glass

The CRL Clear Polycarbonate 'U' with Bulb Attachment PCR12 is a versatile seal that can be mounted to the edge of a door or panel for a variety of installation configurations. The soft Bulb portion of the Seal allows doors to swing both in and out of the enclosure if desired. 

CRL 45 Degree RH Magnetic Profile for Glass-to-Glass fits 1/4" and 5/16" Glass

• Provide Positive Door Closure

• Use Monolithic Tempered Glass

• Mix and Match Configurations to Achieve Desired Result

• Made of Co-Extruded Plastic with Soft Magnetic Receiver

This CRL Magnetic Profile PMB8 provides positive door closure for glass-to-glass applications. It is made of co-extruded material with soft magnetic receiver and will accommodate 1/4" to 5/16" (6 to 8 mm) Glass.

APPLICATION:

180 Degree Glass-to-Glass: Use PMA8 and PMB8 (Door swings in one direction)

180 Degree Glass-to-Glass: Use PMC8 and PMC8 (Door swings in both directions)

135 Degree Glass-to-Glass: Use PMA8 and PMC8 (Door swings out only)

90 Degree Glass-to-Glass: Use PMA8 and PMB8 (Reverse for polarity-door swings out only)

Product Warning:
Suggested gap size is 7/16" (11 mm)

CRL 45 Degree RH Magnetic Profile for Glass-to-Glass fits 3/8" to 1/2" Glass

• Provide Positive Door Closure

• Use Monolithic Tempered Glass

• Mix and Match Configurations to Achieve Desired Result

• Made of Co-Extruded Plastic with Soft Magnetic Receiver

This CRL Magnetic Profile PMB10 provides positive door closure for glass-to-glass applications. It is made of co-extruded material with soft magnetic receiver and will accommodate 1/4" to 5/16" (6 to 8 mm) Glass.

APPLICATION:

180 Degree Glass-to-Glass: Use PMA8 and PMB8 (Door swings in one direction)

180 Degree Glass-to-Glass: Use PMC8 and PMC8 (Door swings in both directions)

135 Degree Glass-to-Glass: Use PMA8 and PMC8 (Door swings out only)

90 Degree Glass-to-Glass: Use PMA8 and PMB8 (Reverse for polarity-door swings out only)

Product Warning:
Suggested gap size is 7/16" (11 mm)

CRL Matte Gun Metal Vienna 037 Series Wall Mount Full Back Plate Hinge V1E037MGM Other Finishes Available

• Accommodates 3/8" to 1/2" (10 to 12 mm) Glass

• Self-Centering with Reversible 5 Degree Pivot Pin

• Available in Several Beautiful Finishes

• 3 Year Warranty

• Wall Mount Full Back Plate Standard Model (Factory Set for Standard Closing Position)

• Use Monolithic Tempered Glass

CRL Vienna Hinges are the solution for wider, heavier doors that traditional hinges are not strong enough to support. Two strategically placed steel pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. For the safety of "mouse-ears" type cut-outs, the two steel pins should be left in place. This allows the Vienna Hinge to be used with it's own CRL "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Vienna Hinge to fit it's own CRL rectangular shaped, square cornered cut-out. In some cases, it will also fit competitive rectangular shaped, square cornered cut-outs.

STANDARD REVERSIBLE PIVOT PIN: Each Vienna Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Vienna Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree).

Using two hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 110 lbs. (50 kg) with a maximum door width of 36" (914 mm).

Using three hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 140 lbs. (63 kg) with a maximum door width of 36" (914 mm).

SPECIFICATIONS:

Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass

Construction: Solid Brass

Hinge Swings: 90 degree In and 90 degree Out

Closing Type: Self-Centering when within 15 degree of closed position.

Cut-Out Required - Except V1E092 which Requires Cut-Out for Door and Two Holes for Fixed Panel

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

Maximum Clamping Screw Torque: 60 lbf.in (677.9 cN.m)

Custom finishes are available on request. Contact CRL Technical Sales Shower Door Department.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Polished Brass Vienna 037 Series Wall Mount 'H' Back Plate Hinge V1EH037BR          Other Finishes Available

• New Wall Plate Design Allows for Tighter Clearance

• Same Vienna Quality with a Different Look

• Square Design is the Most Contemporary Look

The Vienna product line has been updated to include an "H" shaped wall mounting plate, allowing the installer to get the glass closer to the wall. This new design will give increased flexibility in regards to the clearance between the glass and the wall. 

CRL Rose Gold Vienna 074 Series Wall Mount Short Back Plate Hinge V1E074RG         Other Finishes Available

• Accommodates 3/8" to 1/2" (10 to 12 mm) Glass

• Available in Several Beautiful Finishes

• 3 Year Warranty

• Wall Mount Short Back Plate

• Use Monolithic Tempered Glass

CRL Vienna Hinges are the solution for wider, heavier doors that traditional hinges are not strong enough to support. Two strategically placed steel pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. For the safety of "mouse-ears" type cut-outs, the two steel pins should be left in place. This allows the Vienna Hinge to be used with it's own CRL "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Vienna Hinge to fit it's own CRL rectangular shaped, square cornered cut-out. In some cases, it will also fit competitive rectangular shaped, square cornered cut-outs.

STANDARD REVERSIBLE PIVOT PIN: Each Vienna Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Vienna Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree).

Using two hinges with 3/8" glass (10 mm) the hinge will hold up to 100 lbs. (45 kg) with a maximum door width of 34" (864 mm).

Using two hinges with 1/2" glass (12 mm) the hinge will hold up to 100 lbs. (45 kg) with a maximum door width of 32" (813 mm).

Using three hinges with 3/8" glass (10 mm) the hinge will hold up to 130 lbs. (59 kg) with a maximum door width of 34" (864 mm).

Using three hinges with 1/2" glass (12 mm) the hinge will hold up to 130 lbs. (59 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:

Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass

Construction: Solid Brass

Hinge Swings: 90 degree in and 90 degree Out

Closing Type: Self-Centering when within 15 degree of closed position.

Cut-Out Required - Except V1E092 which Requires Cut-Out for Door and Two Holes for Fixed Panel

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

Maximum Clamping Screw Torque: 60 lbf.in (677.9 cN.m)

Custom finishes are available on request. Contact CRL Technical Sales Shower Door Department.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Polished Chrome Vienna Adjustable Wall Mount Offset Back Plate Hinge V1E344CH        Other Finishes Available

• Accommodates 3/8" to 1/2" (10 to 12 mm) Glass

• Available in Several Beautiful Finishes

• 3 Year Warranty

• Wall Mount Short Back Plate

• Use Monolithic Tempered Glass

CRL Vienna Hinges are the solution for wider, heavier doors that traditional hinges are not strong enough to support. Two strategically placed steel pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. For the safety of "mouse-ears" type cut-outs, the two steel pins should be left in place. This allows the Vienna Hinge to be used with it's own CRL "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Vienna Hinge to fit it's own CRL rectangular shaped, square cornered cut-out. In some cases, it will also fit competitive rectangular shaped, square cornered cut-outs.

STANDARD REVERSIBLE PIVOT PIN: Each Vienna Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Vienna Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree).

Using two hinges with 3/8" glass (10 mm) the hinge will hold up to 100 lbs. (45 kg) with a maximum door width of 34" (864 mm).

Using two hinges with 1/2" glass (12 mm) the hinge will hold up to 100 lbs. (45 kg) with a maximum door width of 32" (813 mm).

Using three hinges with 3/8" glass (10 mm) the hinge will hold up to 130 lbs. (59 kg) with a maximum door width of 34" (864 mm).

Using three hinges with 1/2" glass (12 mm) the hinge will hold up to 130 lbs. (59 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:

Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass

Construction: Solid Brass

Hinge Swings: 90 degree in and 90 degree Out

Closing Type: Self-Centering when within 15 degree of closed position.

Cut-Out Required - Except V1E092 which Requires Cut-Out for Door and Two Holes for Fixed Panel

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

Maximum Clamping Screw Torque: 60 lbf.in (677.9 cN.m)

Custom finishes are available on request. Contact CRL Technical Sales Shower Door Department.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Geneva 037 Series Wall Mount Full Back Plate Standard Hinge-Other Finishes Available

• Self-Centering with Reversible 5 Degree Pivot Pin

• Use Monolithic Tempered Glass

• Available in Several Beautiful Finishes

• Three Year Warranty

• Wall Mount Full Back Plate Standard Model (Factory Set for Standard Closing Position)

The CRL Geneva Series of professional Hinges is able to accommodate 5/16" (8 mm) to 1/2" (12 mm) glass. A variety of six styles gives design flexibility, including three different Wall Mount and three different Glass-to-Glass types. Geneva Hinges are self-centering and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off-angle" installations. Made of solid brass with all moving parts (pins and springs) in stainless steel.

Standard Reversible Pivot Pin: Each Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90 Degrees. The opposite side is marked 85 Degrees. Standard Geneva Hinges come with the 90 Degrees side activated. Offset Models come with the Pin pre-set to 85 Degrees (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

Custom Pivot Pin: Custom Pivot Pins (Cat. No. GENP1N) are available to accommodate "off-angle" installations. If the 5 Degree Reversible Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degrees). If using the Custom Pivot Pin, contact our Technical Sales Shower Door Department. Your glass sizes and the aesthetics of the enclosure may be affected by the use of the Custom Pivot Pin.

Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).

Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:

Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass

Special Feature: Offers choice of Standard Model factory set at standard 0 degree closing position, or 5 degree Pre-Set Model for tighter closure into shower interior.

Construction: Solid Brass

Hinge Swings: 90 degree in and 90 degree Out

Closing Type: Self-Centering when within 15 degree of Closed Position

Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. GEN13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.

Custom finishes are available on request. Contact Technical Sales Shower Door Division.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Polished Nickel Geneva 037 Series Wall Mount 'H' Back Plate Hinge-Other Finishes Available

• New Wall Plate Design Allows for Tighter Clearance

• Same Geneva Quality with a Different Look

• Square Design is the Most Contemporary Look

The Geneva/V1e product line has been updated to include an "H" shaped wall mounting plate, allowing the installer to get the glass closer to the wall. This new design will give increased flexibility in regards to the clearance between the glass and the wall. 

CRL Brass Geneva 074 Series Wall Mount Short Back Plate Hinge-Other Finishes Available

• Self-Centering with Reversible 5 Degree Pivot Pin

• Available in Several Beautiful Finishes

• Three Year Warranty

• Wall Mount Short Back Plate Standard Model

• Use Monolithic Tempered Glass

The CRL Geneva Series of professional Hinges is able to accommodate 5/16" (8 mm) to 1/2" (12 mm) glass. A variety of six styles gives design flexibility, including three different Wall Mount and three different Glass-to-Glass types. Geneva Hinges are self-centering and contain a Reversible 5 Degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off-angle" installations. Made of solid brass with all moving parts (pins and springs) in stainless steel.

Standard Reversible Pivot Pin: Each Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked 90 Degrees. The opposite side is marked 85 Degrees. Standard Geneva Hinges come with the 90 Degrees side activated. Offset Models come with the Pin pre-set to 85 Degrees (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

Custom Pivot Pin: Custom Pivot Pins (Cat. No. GENP1N) are available to accommodate "off-angle" installations. If the 5 Degree Reversible Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degrees). If using the Custom Pivot Pin, contact our Technical Sales Shower Door Department. Your glass sizes and the aesthetics of the enclosure may be affected by the use of the Custom Pivot Pin.

Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).

Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:

Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass

Special Feature: Offers choice of Standard Model factory set at standard 0 degree closing position, or 5 degree Pre-Set Model for tighter closure into shower interior.

Construction: Solid Brass

Hinge Swings: 90 degree in and 90 degree Out

Closing Type: Self-Centering when within 15 degree of Closed Position

Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. GEN13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.

Custom finishes are available on request. Contact Technical Sales Shower Door Division.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

Brass Finish Advisory:

Although durable, brass is prone to oxidation. It can give brass and brass finishes a tarnished look, regardless of how the hardware is initially packaged or stored.

CRL Antique Brushed Copper Geneva 044 Series Wall Mount Offset Back Plate Hinge-Other Finishes Available

• Self-Centering with Reversible 5 Degree Pivot Pin

• Available in Several Beautiful Finishes

• Three Year Warranty

• Wall Mount Offset Back Plate (Factory Set for Standard Closing Position)

• Use Monolithic Tempered Glass

The CRL Geneva Series of professional Hinges is able to accommodate 5/16" (8 mm) to 1/2" (12 mm) glass. A variety of six styles gives design flexibility, including three different Wall Mount and three different Glass-to-Glass types. Geneva Hinges are self-centering and contain a Reversible 5 degree Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off-angle" installations. Made of solid brass with all moving parts (pins and springs) in stainless steel.

Each Geneva Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Geneva Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

Custom Pivot Pin: Custom Pivot Pins (Cat. No. GENP1N) are available to accommodate "off-angle" installations. If the 5 Degree Reversible Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degrees). If using the Custom Pivot Pin, contact our Technical Sales Shower Door Department. Your glass sizes and the aesthetics of the enclosure may be affected by the use of the Custom Pivot Pin.

Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).

Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:

Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass

Special Feature: Offers choice of Standard Model factory set at standard 0 Degree closing position, or 5 Degree Pre-Set Model for tighter closure into shower interior.

Construction: Solid Brass

Hinge Swings: 90 degree in and 90 degree Out

Closing Type: Self-Centering when within 15 degree of Closed Position

Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. GEN13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.

Custom finishes are available on request. Contact Technical Sales Shower Door Division.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Modern Gold Cologne 037 Series Wall Mount 'H' Back Plate Hinge COL037MG  Other Finishes Available

• Accommodates 3/8" to 1/2" (10 to 12 mm) Glass

• Self-Centering with Reversible 5 Degree Pivot Pin

• Available in Several Beautiful Finishes

• 3 Year Warranty

• Wall Mount 'H' Back Plate Standard Model

• Use Monolithic Tempered Glass

CRL Cologne Hinges are similar to the popular Vienna Hinges, but with one change: They have radius corners and beveled edges to provide a sleek appearance. Cologne Hinges are the solution for wider, heavier doors that traditional hinges are not strong enough to support. Two strategically placed steel pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. For the safety of "mouse-ears" type cut-outs, the two steel pins should be left in place. This allows the Cologne Hinge to be used with its own CRL "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Cologne Hinge to fit its own CRL rectangular shaped, square cornered cut-out. In some cases, it will also fit competitive rectangular, square cornered cut-outs.

STANDARD REVERSIBLE PIVOT PIN: Each Cologne Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90º. The opposite side of the Pin is marked 85º. Standard Cologne Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree).

Using two hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 110 lbs. (50 kg) with a maximum door width of 36" (914 mm).

Using three hinges with 3/8" and 1/2" glass (10 and 12 mm) the hinge will hold up to 140 lbs. (63 kg) with a maximum width of 36" (914 mm).

SPECIFICATIONS:

Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass

Construction: Solid Brass

Hinge Swings: 90 degree In and 90 degree Out

Closing Type: Self-Centering when within 15 degree of closed position.

Cut-Out Required - Except C0L092 Which Requires Cut-Out for Door and Two Holes for Fixed Panel

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

Maximum Clamping Screw Torque: 60 lbf.in (677.9 cN.m)

Custom finishes are available on request by contacting CRL Technical Sales Department.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Matte Black Cologne 044 Series Wall Mount Offset Back Plate Hinge Col044MBL Other Finishes Available

• Accommodates 3/8" to 1/2" (10 to 12 mm) Glass

• Available in Several Beautiful Finishes

• 3 Year Warranty

• Wall Mount Offset Back Plate Standard Model

• Use Monolithic Tempered Glass

CRL Cologne Hinges are similar to the popular Vienna Hinges, but with one change: They have radius corners and beveled edges to provide a sleek appearance. Cologne Hinges are the solution for wider, heavier doors that traditional hinges are not strong enough to support. Two strategically placed steel pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. For the safety of "mouse-ears" type cut-outs, the two steel pins should be left in place. This allows the Cologne Hinge to be used with its own CRL "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Cologne Hinge to fit its own CRL rectangular shaped, square cornered cut-out. In some cases, it will also fit competitive rectangular, square cornered cut-outs.

STANDARD REVERSIBLE PIVOT PIN: Each Cologne Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90º. The opposite side of the Pin is marked 85º. Standard Cologne Hinges come with the 90º side activated. Pre-Set Models come with the Pin pre-set for 85º (5º tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90º. If the standard 5º Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45º).

Using two hinges with 3/8" glass (10 mm) the hinge will hold up to 100 lbs. (45 kg) with a maximum door width of 34" (864 mm).

Using two hinges with 1/2" glass (12 mm) the hinge will hold up to 100 lbs. (45 kg) with a maximum door width of 32" (813 mm).

Using three hinges with 3/8" glass (10 mm) the hinge will hold up to 130 lbs. (59 kg) with a maximum door width of 34" (864 mm).

Using three hinges with 1/2" glass (12 mm) the hinge will hold up to 130 lbs. (59 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:

Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass

Construction: Solid Brass

Hinge Swings: 90º In and 90º Out

Closing Type: Self-Centering when within 15º of closed position.

Cut-Out Required - Except C0L092 Which Requires Cut-Out for Door and Two Holes for Fixed Panel

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

Maximum Clamping Screw Torque: 60 lbf.in (677.9 cN.m)

Custom finishes are available on request by contacting CRL Technical Sales Department.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Polished Chrome Cologne 180 Series 180º Glass-to-Glass Hinge COL180CH    Other Finishes Available

• Accommodates 3/8" to 1/2" (10 to 12 mm) Glass

• Available in Several Beautiful Finishes

• 3 Year Warranty

• 180º Glass-to-Glass

• Use Monolithic Tempered Glass

CRL Cologne Hinges are similar to the popular Vienna Hinges, but with one change: They have radius corners and beveled edges to provide a sleek appearance. Cologne Hinges are the solution for wider, heavier doors that traditional hinges are not strong enough to support. Two strategically placed steel pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. For the safety of "mouse-ears" type cut-outs, the two steel pins should be left in place. This allows the Cologne Hinge to be used with its own CRL "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Cologne Hinge to fit its own CRL rectangular shaped, square cornered cut-out. In some cases, it will also fit competitive rectangular, square cornered cut-outs.

STANDARD REVERSIBLE PIVOT PIN: Each Cologne Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90º. The opposite side of the Pin is marked 85º. Standard Cologne Hinges come with the 90º side activated. Pre-Set Models come with the Pin pre-set for 85º (5º tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90º. If the standard 5º Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45º).

Using two hinges with 3/8" to 1/2" glass (10 and 12 mm) the hinge will hold up to 110 lbs. (50 kg) with a maximum door width of 36" (914 mm).

Using three hinges with 3/8" and 1/2" glass (10 and 12 mm) the hinge will hold up to 140 lbs. (63 kg) with a maximum width of 36" (914 mm).

SPECIFICATIONS:

Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass

Construction: Solid Brass

Hinge Swings: 90º In and 90º Out

Closing Type: Self-Centering when within 15º of closed position.

Cut-Out Required - Except C0L092 Which Requires Cut-Out for Door and Two Holes for Fixed Panel

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

Maximum Clamping Screw Torque: 60 lbf.in (677.9 cN.m)

Custom finishes are available on request by contacting CRL Technical Sales Department.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL French Gold Cologne 045 Series 135º Glass-to-Glass Hinge COL045FG     Other Finishes Available

• Accommodates 3/8" to 1/2" (10 to 12 mm) Glass

• Available in Several Beautiful Finishes

• 3 Year Warranty

• 135º Glass-to-Glass

• Use Monolithic Tempered Glass

CRL Cologne Hinges are similar to the popular Vienna Hinges, but with one change: They have radius corners and beveled edges to provide a sleek appearance. Cologne Hinges are the solution for wider, heavier doors that traditional hinges are not strong enough to support. Two strategically placed steel pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. For the safety of "mouse-ears" type cut-outs, the two steel pins should be left in place. This allows the Cologne Hinge to be used with its own CRL "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Cologne Hinge to fit its own CRL rectangular shaped, square cornered cut-out. In some cases, it will also fit competitive rectangular, square cornered cut-outs.

STANDARD REVERSIBLE PIVOT PIN: Each Cologne Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90º. The opposite side of the Pin is marked 85º. Standard Cologne Hinges come with the 90º side activated. Pre-Set Models come with the Pin pre-set for 85º (5º tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90º. If the standard 5º Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45º).

Using two hinges with 3/8" to 1/2" glass (10 and 12 mm) the hinge will hold up to 110 lbs. (50 kg) with a maximum door width of 36" (914 mm).

Using three hinges with 3/8" and 1/2" glass (10 and 12 mm) the hinge will hold up to 140 lbs. (63 kg) with a maximum width of 36" (914 mm).

SPECIFICATIONS:

Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass

Construction: Solid Brass

Hinge Swings: 90º In and 90º Out

Closing Type: Self-Centering when within 15º of closed position.

Cut-Out Required - Except C0L092 Which Requires Cut-Out for Door and Two Holes for Fixed Panel

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

Maximum Clamping Screw Torque: 60 lbf.in (677.9 cN.m)

Custom finishes are available on request by contacting CRL Technical Sales Department.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Polished Chrome Pinnacle 037 Series Wall Mount 'H' Back Plate Hinge P1N037CH      Other Finishes Available

• Self-Centering with Reversible 5 Degree Pivot Pin

• Available in Several Beautiful Finishes

• Three Year Warranty

• Wall Mount 'H' Back Plate Standard Model (Factory Set for Standard Closing Position)

• Use Monolithic Tempered Glass

The CRL Pinnacle Hinge is similar to our popular Geneva Series Hinge, but with one design change: Pinnacle has radius corners and beveled edges for a sleek appearance. Pinnacle Hinges accommodate 5/16" (8 mm) to 1/2" (12 mm) thick tempered safety glass, and are self-centering when within 15 degree of the closed position. Pinnacle Hinges are constructed of solid brass, and have stainless steel plunger tips, pins, and springs to ensure long service life and reliable door closure. The Pinnacle Hinge also contains the same Reversible 5 degree Pivot Pin featured in our Geneva, Cathedral, Roman, Ultimate, and Elite Series Hinges. A Custom Pivot Pin is also available for "off-angle" installations.

STANDARD REVERSIBLE PIVOT PIN: Each Pinnacle Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Pinnacle Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree).

Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).

Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:

Glass Thickness: 5/16" to 1/2" (8 to 12 mm) Tempered Safety Glass

Special Feature: Wall Mount Hinges and 180 degree Glass-to-Glass Hinge offer a choice of a Standard Model, factory set at standard closing position (0 degree), or a 5 degree Pre-Set Model for tighter closure into shower interior.

Construction: Solid Brass

Hinge Swings: 90 degree in and 90 degree out

Closing Type: Self-Centering when within 15 degree of closed position

Cut-Out Required

Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. P1N13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.

Replacement Hardware :P102** - Wall plate replacement screws

P615** - Cover plate replacement screws

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

CRL Polished Brass Pinnacle 074 Series Wall Mount Short Back Plate Hinge P1N074BR      Other Finishes Available

• Self-Centering with Reversible 5 Degree Pivot Pin

• Available in Several Beautiful Finishes

• Three Year Warranty

• Wall Mount Short Back Plate Standard Model (Factory Set for Standard Closing Position)

• Use Monolithic Tempered Glass

The CRL Pinnacle Hinge is similar to our popular Geneva Series Hinge, but with one design change: Pinnacle has radius corners and beveled edges for a sleek appearance. Pinnacle Hinges accommodate 5/16" (8 mm) to 1/2" (12 mm) thick tempered safety glass, and are self-centering when within 15 degree of the closed position. Pinnacle Hinges are constructed of solid brass, and have stainless steel plunger tips, pins, and springs to ensure long service life and reliable door closure. The Pinnacle Hinge also contains the same Reversible 5 degree Pivot Pin featured in our Geneva, Cathedral, Roman, Ultimate, and Elite Series Hinges. A Custom Pivot Pin is also available for "off-angle" installations.

STANDARD REVERSIBLE PIVOT PIN: Each Pinnacle Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Pinnacle Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree).

Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).

Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:

Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass

Special Feature: Wall Mount Hinges and 180 degree Glass-to-Glass Hinge offer a choice of a Standard Model, factory set at standard closing position (0 degree), or a 5 degree Pre-Set Model for tighter closure into shower interior.

Construction: Solid Brass

Hinge Swings: 90 degree in and 90 degree out

Closing Type: Self-Centering when within 15 degree of closed position

Cut-Out Required

Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. P1N13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.

Replacement Hardware :P102** - Wall plate replacement screws

P615** - Cover plate replacement screws

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

Brass Finish Advisory:

Although durable, brass is prone to oxidation. It can give brass and brass finishes a tarnished look, regardless of how the hardware is initially packaged or stored.

CRL Polished Brass Pinnacle 044 Series Wall Mount Offset Back Plate Hinge P1N044BR     Other Finishes Available

• Self-Centering with Reversible 5 Degree Pivot Pin

• Available in Several Beautiful Finishes

• Three Year Warranty

• Wall Mount Offset Back Plate Standard Model (Factory Set for Standard Closing Position)

• Use Monolithic Tempered Glass

The CRL Pinnacle Hinge is similar to our popular Geneva Series Hinge, but with one design change: Pinnacle has radius corners and beveled edges for a sleek appearance. Pinnacle Hinges accommodate 5/16" (8 mm) to 1/2" (12 mm) thick tempered safety glass, and are self-centering when within 15 degree of the closed position. Pinnacle Hinges are constructed of solid brass, and have stainless steel plunger tips, pins, and springs to ensure long service life and reliable door closure. The Pinnacle Hinge also contains the same Reversible 5 degree Pivot Pin featured in our Geneva, Cathedral, Roman, Ultimate, and Elite Series Hinges. A Custom Pivot Pin is also available for "off-angle" installations.

STANDARD REVERSIBLE PIVOT PIN: Each Pinnacle Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Pinnacle Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree).

Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).

Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:

Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass

Special Feature: Wall Mount Hinges and 180 degree Glass-to-Glass Hinge offer a choice of a Standard Model, factory set at standard closing position (0 degree), or a 5 degree Pre-Set Model for tighter closure into shower interior.

Construction: Solid Brass

Hinge Swings: 90 degree in and 90 degree out

Closing Type: Self-Centering when within 15 degree of closed position

Cut-Out Required

Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. P1N13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.

Replacement Hardware :P102** - Wall plate replacement screws

P615** - Cover plate replacement screws

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

CRL Brushed Nickel Pinnacle 092 Series 90 Degree Glass-to-Glass Hinge P1N092BN                Other Finishes Available

• Self-Centering with Reversible 5 Degree Pivot Pin

• Available in Several Beautiful Finishes

• Three Year Warranty

• 90 Degree Glass-to-Glass

• Use Monolithic Tempered Glass

The CRL Pinnacle Hinge is similar to our popular Geneva Series Hinge, but with one design change: Pinnacle has radius corners and beveled edges for a sleek appearance. Pinnacle Hinges accommodate 5/16" (8 mm) to 1/2" (12 mm) thick tempered safety glass, and are self-centering when within 15 degree of the closed position. Pinnacle Hinges are constructed of solid brass, and have stainless steel plunger tips, pins, and springs to ensure long service life and reliable door closure. The Pinnacle Hinge also contains the same Reversible 5 degree Pivot Pin featured in our Geneva, Cathedral, Roman, Ultimate, and Elite Series Hinges. A Custom Pivot Pin is also available for "off-angle" installations.

STANDARD REVERSIBLE PIVOT PIN: Each Pinnacle Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Pinnacle Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree).

Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).

Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:

Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass

Special Feature: Wall Mount Hinges and 180 degree Glass-to-Glass Hinge offer a choice of a Standard Model, factory set at standard closing position (0 degree), or a 5 degree Pre-Set Model for tighter closure into shower interior.

Construction: Solid Brass

Hinge Swings: 90 degree in and 90 degree out

Closing Type: Self-Centering when within 15 degree of closed position

Cut-Out Required

Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. P1N13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.

Replacement Hardware :P102** - Wall plate replacement screws

P615** - Cover plate replacement screws

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

CRL Brushed Satin Nickel Vernon Oil Dynamic Wall Mount Full Back Plate Hinge H8010BTSN   Other Finishes Available

• For Self-Closing Glass Doors from 5/16" to 9/16" (8 to 13.52 mm) Thick

• Designed for Use on Interior Doors in Humid Conditions and High Temperatures

• Aluminum Body in Your Choice of Brite Chrome, Brushed Satin, and Satin Anodized Finishes

• Adjustable Closing Speed

• A Great Alternative to Floor Closers and Patch Fittings

This CRL Oil Dynamic Full Back Plate Wall Mount Hinge swings in and out a full 90 degrees, with stops at 0, +90, and –90 degrees. Closing speed can be adjusted, making it a great alternative to floor closers and patch fittings. For doors up to 39" (1 m) wide. Maximum weight per two hinges is 220 lbs. (100 kg). Designed for use on interior doors in damp and humid environments and high temperatures up to 212°F (100°C), such as steam rooms, Turkish baths and shower doors.

The Oil Dynamic Hinge represents the evolution and the synthesis between automatic mechanical hinges and hydraulic door closers. Oil Dynamic allows you to design a self-closing door without the need of a floor-mounted or overhead closing device. This gives you the advantage of being able to install an 'all-glass' door in an existing opening without the need for extensive retrofitting of hardware into the floor or overhead.

Properly mounted, two Oil Dynamic Hinges will support a 5/16" to 9/16" (8 to 13.52 mm) thick glass door up to 39" (1 m) in width and weighing up to 220 lbs. (100 kg). A control valve lets you adjust the hinge to the desired closing speed. And Oil Dynamic is ambidextrous, with positive stops at 0 and 90 degrees, giving you even more design freedom.

The Oil Dynamic Hinge features an aluminum body in distinct configurations for Wall Mount and Glass-to-Glass applications. Oil Dynamic Hinges have been subject to strict testing (over 1 million cycles), assuring long lasting service.

SPECIFICATIONS:

Glass Thickness Range: 5/16" to 9/16" (8 to 13.52 mm)

Construction: Aluminum

Hinge Swings: 90 Degrees Inwards and Outwards (Except H8060 Model, Which Only Swings One Way)

Closing Type: Automatic Closing From 0 to 80 Degrees

Special Feature: Holds Open at 90 Degrees; Adjustable Closing Speed. No Hold Open Models Available (Except H8060 Model).

Cut-Out Required

Includes: Snap-In Molded Gaskets for 5/16" to 9/16" (8 to 13.52 mm) Glass; Hex Screws Maximum Capacities Using Two Hinges: Door Width: 39" (1 m); Door Weight: 220 lbs. (100 kg)

NOTE: Do not use more than two hinges on one door. Not suitable for exterior and outdoor use. For exterior and outdoor use we recommend H8015JC Series.

Product Warning:

Do not use more than two hinges on one door. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Technical Sales Department. Use only the template included with our hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

The hinge cover plate uses a 4mm allen key.

CRL Matte Black Vernon Wall Mount Offset Back Plate Hinge H8211BTMBL   Other Finishes Available

• For Self-Closing Glass Doors From 5/16" to 9/16" (8 to 13.52 mm) Thick

• Aluminum Body in Your Choice of Brite Chrome, Satin Nickel, and Satin Anodized Finishes

• Adjustable Closing Speed

• A Great Alternative to Floor Closers and Patch Fittings

This CRL Oil Dynamic Full Back Plate Wall Mount Hinge swings in and out a full 90º, with stop at 0º. Closing speed can be adjusted. Intended for doors up to 39" (1 m) wide. Maximum weight per two hinges is 220 lbs. (100 kg). Designed for use on interior door applications only.

The Oil Dynamic Hinge represents the evolution and the synthesis between automatic mechanical hinges and hydraulic door closers. Oil Dynamic allows you to design a self-closing door without the need of a floor-mounted or overhead closing device. This gives you the advantage of being able to install an 'all-glass' door in an existing opening without the need for extensive retrofitting of hardware into the floor or overhead.

Properly mounted, two Oil Dynamic Hinges will support a 5/16" to 9/16" (8 to 13.52 mm) thick glass door up to 39" (1 m) in width and weighing up to 220 lbs. (100 kg). (Do not use more than two hinges.) A control valve lets you adjust the hinge to the desired closing speed. And Oil Dynamic is ambidextrous, giving you even more design freedom.

The Oil Dynamic Hinge features an aluminum body in distinct configurations for Wall Mount and Glass-to-Glass applications. Oil Dynamic has been subject to strict testing (over 1 million cycles), assuring long lasting service.

SPECIFICATIONS:

Glass Thickness Range: 5/16" to 9/16" (8 to 13.52 mm)

Construction: Aluminum

Hinge Swings: 90º Inwards and Outwards (Except H8060 Model, Which Only Swings One Way)

Closing Type: Automatic Closing From 0º to 80º

Cut-Out Glass Fabrication Required

Includes: Snap-In Molded Gaskets for 5/16" to 9/16" (8 to 13.52 mm) Glass

Maximum Capacities Using Two Hinges: Door Width: 39" (1 m); Door Weight: 220 lbs.(100kg)

Product Warning:

Do not use more than two hinges on one door. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Technical Sales Department. Use only the template included with our hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

*The Adjustable Closing Speed valve uses a 3mm allen key and the hinge cover plate uses a 4mm allen key. 

CRL Brite Chrome Vernon Oil Dynamic 180º Glass-to-Glass Hinge H8015BTCH  Other Finishes Available

• For Self-Closing Glass Doors from 5/16" to 9/16" (8 to 13.52 mm) Thick

• Designed for Use on Interior Doors in Humid Conditions and High Temperatures

• Body in Your Choice of Three Finishes: Brite Chrome, Brushed Satin, and Satin Anodized

• Hold Open or No Hold Open Models

• Adjustable Closing Speed

This CRL Oil Dynamic 180º Glass-to-Glass Hinge swings in and out a full 90º, with stops at 0º, +90º, and –90º. Closing speed can be adjusted, making it a great alternative to floor closers and patch fittings. For doors up to 39" (1 m) wide. Maximum weight per two hinges is 176 lbs. (79.8 kg).

Designed for use on interior doors in damp and humid environments and high temperatures up to 212°F (100°C), such as steam rooms, Turkish baths, and shower doors.

The Oil Dynamic Hinge represents the evolution and the synthesis between automatic mechanical hinges and hydraulic door closers. It allows you to design a self-closing door without the need of a floor-mounted or overhead closing device. This gives you the advantage of being able to install an 'all-glass' door in an existing opening without the need for extensive retrofitting of hardware into the floor or overhead.

Properly mounted, two Oil Dynamic Hinges will support a 5/16" to 9/16" (8 to 13.52 mm) thick glass door up to 39" (1 m) in width and weighing up to 176 lbs. (79.8 kg). A control valve lets you adjust the hinge to the desired closing speed. And Oil Dynamic is ambidextrous, with positive stops at 0º and 90º, giving you even more design freedom.

The Oil Dynamic Hinge features an aluminum body in distinct configurations for Wall Mount and Glass-to-Glass applications. It has been subject to strict testing (over 1 million cycles), assuring long lasting service.

SPECIFICATIONS:

Glass Thickness Range: 5/16" to 9/16" (8 to 13.52 mm)

Construction: Aluminum

Hinge Swings: 90º Inwards and Outwards (Except H8060BT Model, Which Only Swings One Way)

Closing Type: Automatic Closing From 0º to 80º

Special Feature: Holds Open at 90º; Adjustable Closing Speed. No Hold Open Models Available (Except H8060BT Model).

Cut-Out Required

Includes: Snap-In Molded Gaskets for 5/16" to 9/16" (8 to 13.52 mm) Glass; Hex Screws

Maximum Capacities Using Two Hinges: Door Width: 39" (1 m); Door Weight: 176 lbs. (79.8 kg)

NOTE: Do not use more than two hinges on one door. Not suitable for exterior/outdoor use. For exterior use we recommend H8015JCBS.

Product Warning:

Do not use more than two hinges on one door. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Technical Sales Department. Use only the template included with our hinge. Cut-out dimensions for CRL hinges may not match those of other brands.

CRL 316 Brushed Stainless Steel Ultimate 037 Series Wall Mount 'H' Back Plate Hinge ULT037SS

• Self-Centering with Reversible 5 Degree Pivot Pin

• Available in Two Beautiful Finishes

• 3 Year Warranty

• Wall Mount

• Use Monolithic Tempered Glass

The CRL Ultimate Series Hinge is named primarily for its combination of design elegance and service life. Featuring the same beautiful rounded corners and beveled edges of the Pinnacle Hinge, the Ultimate Hinge is constructed entirely of 316 stainless steel. This all-stainless construction gives the Ultimate Hinge a durability not usually found in brass hinges. The Ultimate has superior survivability in conditions of accelerated corrosion, such as seaside communities with high atmospheric salt levels. The Ultimate Hinge has stainless steel plunger tips, pins, and springs to ensure long service life and reliable door closure. It also has the same Reversible 5 degree Pivot Pin featured in our Geneva, Cathedral, Pinnacle, Roman, and Elite Series Hinges. A Custom Pivot Pin is available for "off-angle" installations.

STANDARD REVERSIBLE PIVOT PIN: Each Roman Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90 degree. The opposite side of the Pin is marked 85 degree. Standard Roman Hinges come with the 90 degree side activated. Pre-Set Models come with the Pin pre-set for 85 degree (5 degree tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side.

CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90 degree. If the standard 5 degree Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45 degree).

Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 90 lbs. (41 kg) with a maximum door width of 30" (762 mm).

Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 130 lbs. (59 kg) with a maximum door width of 32" (813 mm).

SPECIFICATIONS:

Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass

Special Feature: 316 Stainless steel construction provides greater durability in conditions subject to accelerated corrosion, such as seaside communities with high atmospheric salt levels.

Construction: 316 Stainless Steel

Hinge Swings: 90 degree in and 90 degree Out

Closing Type: Self-Centering when within 15 degree of closed position.

Cut-Out Required

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

Custom finishes are available on request. For more information contact CRL Shower Door Technical Sales.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

Stainless Steel Advisory:

Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish.

CRL Brushed Bronze Victoria Series Wall Mount Full Back Plate Hinge VCT037BBRZ   Other Finishes Available

• An Excellent Choice for Heavier, Wider Shower Doors

• Integrated Safety Interlock Enhances Glass Panel Control

• Wall Mount and 180 Degree Glass-to-Glass Models Available

• For Use with 3/8" to 1/2" (10 to 12 mm) Thick Tempered Safety Glass

CRL Victoria Series Hinges have the ability of supporting wider, heavier doors, with a maximum door weight of 140 lbs. (64 kg), and a maximum door width of 39" (1 m) using only two hinges.

NOTE: Do not use three hinges.

This produces a frameless aesthetic by reducing the amount of hardware needed. These hinges utilize an integrated stiffening beam to minimize clamping plate flex, resulting in exceptional holding power. They also deliver increased self-centering force, and the heat-treated stainless steel springs produce enhanced durability. For use with 3/8" and 1/2" (10 and 12 mm) thick tempered glass. Stocked in six popular finishes, with custom finishes available.

Using two hinges with 3/8" to 1/2" glass (10 to 12 mm), 39" (1 m) width, the two hinges will hold up to 140 lbs. (64 kg).

SPECIFICATIONS:

Glass Thickness: 3/8" to 1/2" (10 to 12 mm) Tempered Safety Glass

Construction: Solid Brass

Hinge Swings: 90 Degree in and 90 Degree Out (at Factory Set Position)

Closing Type: Self-Centering when within 15 Degree of Closed Position

Cut-Out Required

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

NOTE: Do not exceed either door weight or door width maximum capacities. Maximum two hinges per door. Glass fabrication is required.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department. Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Oil Rubbed Bronze Victoria Series 180 Degree Glass-to-Glass Series Hinge VCT180ORB    Other Finishes Available

• An Excellent Choice for Heavier, Wider Shower Doors

• Integrated Safety Interlock Enhances Glass Panel Control

• Wall Mount and 180 Degree Glass-to-Glass Models Available

• For Use with 3/8" to 1/2" (10 to 12 mm) Thick Tempered Safety Glass

CRL Victoria Series Hinges have the ability of supporting wider, heavier doors, with a maximum door weight of 140 lbs. (64 kg), and a maximum door width of 39" (1 m) using only two hinges.

NOTE: Do not use three hinges.

This produces a frameless aesthetic by reducing the amount of hardware needed. These hinges utilize an integrated stiffening beam to minimize clamping plate flex, resulting in exceptional holding power. They also deliver increased self-centering force, and the heat-treated stainless steel springs produce enhanced durability. For use with 3/8" and 1/2" (10 and 12 mm) thick tempered glass. Stocked in six popular finishes, with custom finishes available.

Using two hinges with 3/8" to 1/2" glass (10 to 12 mm), 39" (1 m) width, the two hinges will hold up to 140 lbs. (64 kg).

SPECIFICATIONS:

Glass Thickness: 3/8" to 1/2" (10 to 12 mm) Tempered Safety Glass

Construction: Solid Brass

Hinge Swings: 90 Degree in and 90 Degree Out (at Factory Set Position)

Closing Type: Self-Centering when within 15 Degree of Closed Position

Cut-Out Required

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

NOTE: Do not exceed either door weight or door width maximum capacities. Maximum two hinges per door. Glass fabrication is required.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department. Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Brass Plymouth Series Wall Mount 'H' Back Plate Hinge PLY037BR     Other Finishes Available

• An Excellent Choice for Heavier, Wider Shower Doors

• Integrated Safety Interlock Enhances Glass Panel Control

• Wall Mount and 180 Degree Glass-to-Glass Models Available

• For Use with 3/8" to 1/2" (10 to 12 mm) Thick Tempered Glass

CRL Plymouth Series Hinges have the ability of supporting wider, heavier doors, with a maximum door weight of 140 lbs. (64 kg), and a maximum door width of 39" (1 m) using only two hinges.

NOTE: Do not use three hinges. This produces a frameless aesthetic by reducing the amount of hardware needed.

These hinges utilize an integrated stiffening beam to minimize clamping plate flex, resulting in exceptional holding power. They also deliver increased self-centering force, and the heat-treated stainless steel springs produce enhanced durability. For use with 3/8" and 1/2" (10 and 12 mm) thick tempered glass. Stocked in six popular finishes, with custom finishes available.

Using two hinges with 3/8" to 1/2" glass (10 to 12 mm), 39" (1 m) width, the two hinges will hold up to 140 lbs. (64 kg).

SPECIFICATIONS:

Glass Thickness: 3/8" to 1/2" (10 to 12 mm) Tempered Safety Glass

Construction: Solid Brass

Hinge Swings: 90 Degree in and 90 Degree Out (at Factory Set Position)

Closing Type: Self-Centering when within 15 Degree of Closed Position

Cut-Out Required

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

NOTE: Do not exceed either door weight or door width maximum capacities. Maximum two hinges per door. Glass fabrication is required.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department. Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

Brass Finish Advisory:

Although durable, brass is prone to oxidation. It can give brass and brass finishes a tarnished look, regardless of how the hardware is initially packaged or stored.

CRL Brushed Nickel 180 Degree Glass-to-Glass Plymouth Series Hinge PLY180BN  Other Finishes Available

• An Excellent Choice for Heavier, Wider Shower Doors

• Integrated Safety Interlock Enhances Glass Panel Control

• Wall Mount and 180 Degree Glass-to-Glass Models Available

• For Use with 3/8" to 1/2" (10 to 12 mm) Thick Tempered Glass

CRL Plymouth Series Hinges have the ability of supporting wider, heavier doors, with a maximum door weight of 140 lbs. (64 kg), and a maximum door width of 39" (1 m) using only two hinges.

NOTE: Do not use three hinges.

This produces a frameless aesthetic by reducing the amount of hardware needed. These hinges utilize an integrated stiffening beam to minimize clamping plate flex, resulting in exceptional holding power. They also deliver increased self-centering force, and the heat-treated stainless steel springs produce enhanced durability.

Using two hinges with 3/8" to 1/2" glass (10 to 12 mm), 39" (1 m) width, the two hinges will hold up to 140 lbs. (64 kg).

SPECIFICATIONS:

Glass Thickness: 3/8" to 1/2" (10 to 12 mm) Tempered Safety Glass

Construction: Solid Brass

Hinge Swings: 90 Degree in and 90 Degree Out (at Factory Set Position)

Closing Type: Self-Centering when within 15 Degree of Closed Position

Cut-Out Required

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

NOTE: Do not exceed either door weight or door width maximum capacities. Maximum two hinges per door. Glass fabrication is required.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department. Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Matte Black Prima 01 Series Top or Bottom Mount Hinge PPH01MBL       Other Finishes Available

• Top or Bottom Mount (Can be Adapted to Deluxe Header Kit)

• Self-Centering with Optional 5 Degree Pivot Pin Set

• Available in Several Beautiful Finishes

• 3 Year Warranty

• Use Monolithic Tempered Glass

• U.S. Patent 5,297,313

CRL Prima Series Pivot Hinges are designed for use with 5/16" to 3/8" (8 to 10 mm) tempered safety glass, and provide an extra number of application possibilities. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. Prima Series Pivot Hinges are self-centering, with four springs for maximum retention strength. Optional Cat. No. P1VP1N 5 degree Pre-Set Pivot Pin Sets may be ordered separately. In addition, Pre-Set 5 degree Hinge models are available. The PPH01 Model is adaptable to our Deluxe Header System for shower enclosures not going all the way up to the ceiling. Our PPH06 Model is only compatible with our EZ-Adjust Header System. It includes an adaptor used with the EZ-Adjust Header System. (Must order HAB01 Adaptor Block Separately)

Optional 5 degree Pivot Pin set (For Prima, Cardiff, Rondo, and Shell Series): Optional 5 degree Pivot Pin Sets are available when you want to alter the closing position of the door by 5 degree. These Pivot Pins may be inserted prior to installation, or retrofitted after the installation is complete. Sold as a set: One for the top, and one for the bottom. Not included with hinge purchase. Pre-Set 5 degree Hinge models are available from stock.

Using two hinges with 5/16" to 3/8" glass (8 to 10 mm) the hinge will hold up to 100 lbs. (45 kg) with a maximum width of 31" (787 mm).

SPECIFICATIONS:

Glass Thickness: 5/16" (8 mm) to 3/8" (10 mm) Tempered Safety Glass

Special Features: Top and Bottom Mount design allows more glass to show. Use of these hinges will reduce quantity of cut-outs required when compared to standard side mount glass-to-glass hinges. Cat. No. PPH01 can be mounted floor and ceiling, or floor and header.

Construction: Solid Brass

Hinge Swings: Full Rotation

Closing Type: Self-Centering when within 15 degree of closed position.

Cut-Out Required (PPH135 Model also requires two holes; PPH07 Model requires Cut-Out for Hinge and Hole for Clamp).

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

This hinge series is patented (Patent No. 5,297,313).

Custom finishes are available on request. Contact the CRL Technical Sales Department.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Polished Chrome Cardiff Series Top or Bottom Mount Hinge CAR01CH  Other Finishes Available

• Top or Bottom Mount (Can be Adapted to Deluxe Header Kit)

• Available in Several Beautiful Finishes

• 3 Year Warranty

• Use Monolithic Tempered Glass

• U.S. Patent 5,297,313

CRL Cardiff Series Pivot Hinges are designed for use with 5/16" (8 mm) to 3/8" (10 mm) tempered safety glass, and provide an extra number of application possibilities. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. Cardiff Series Pivot Hinges are self-centering, with four springs for maximum retention strength. Optional 5º Pre-Set Pivot Pin Sets may be ordered separately. The Cardiff Series is adaptable to our Deluxe Header System for shower enclosures not going all the way up to the ceiling. (Must order HAB01 Adaptor Block Separately.)

NOTE: Optional 5º Pivot Pin Set (for Cardiff, Prima, Rondo, and Shell Series) Optional 5º Pivot Pin sets are available when you want to alter the closing position of the door by 5º. These Pivot Pins may be inserted prior to installation, or retrofitted after the installation is complete. Sold as a set of two, one for the top, and one for the bottom. Not included with hinge purchase.

Using two hinges with 5/16" or 3/8" glass (8 or 10 mm) the hinge will hold up to 100 lbs. (45 kg) with maximum door width of 31" (787 mm).

SPECIFICATIONS:

Glass Thickness: 5/16" (8 mm) to 3/8" (10 mm) Tempered Safety Glass

Special Features: Top and Bottom Mount design allows more glass to show. Use of these hinges will reduce quantity of cut-outs required when compared to standard side mount glass-to-glass hinges. Cat. No. CAR01 can be mounted floor and ceiling, or floor and header.

Construction: Solid Brass

Hinge Swings: Full Rotation

Closing Type: Self-Centering when within 15º of closed position.

Cut-Out Required

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

This hinge series is patented (Patent No. 5,297,313).

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Brushed Bronze Senior Prima 01 Series Top or Bottom Mount Hinge SRPPH01BBRZ  Other Finishes Available

• Top or Bottom Mount

• For Use with 1/2" (12 mm) Glass

• Available in Several Beautiful Finishes

• Use Monolithic Tempered Glass

• 3 Year Warranty

• U.S. Patent 5,297,313

Advantages of CRL Senior Prima Hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Glass-to-Fixed Transom Mount Pivot Hinge is used for doors having fixed transoms above them. When placed vertically, either style can be used in movable transom installations. These Pivot Hinges are self-centering, with four springs for maximum retention strength. The SRPPH01 Model is adaptable to our Deluxe Header System.

NOTE: Must order SRHAB01 Senior Adaptor Block separately. Our SRPPH06 Model is only compatible with our EZ-Adjust Header System. It includes an adaptor used with our EZ-Adjust Header System.

SENIOR PRIMA: Using two hinges with 1/2" (12 mm) tempered safety glass, the hinge will hold up to 145 lbs. (66 kg) with a maximum door width of 36" (914 mm).

JUNIOR PRIMA: Using two hinges with 1/4" (6 mm) tempered safety glass, the hinge will hold up to 62 lbs. (28 kg) with a maximum door width of 28" (711 mm).

SPECIFICATIONS:

Glass Thickness:

Senior Prima 1/2" (12 mm) Tempered Safety Glass

Junior Prima 1/4" (6 mm) Tempered Safety Glass

Special Feature: Top and Bottom Mount allows more glass exposure. Can also save on glass fabrication costs when compared to use of Side Mount Glass-to-Glass Hinges requiring more cut-outs.

Construction: Solid Brass

Hinge Swings: Full Rotation

Closing Type: Self-Centering when within 15° of closed position.

Cut-Out Required

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

Senior and Junior Prima Hinges are patented (Patent No. 5,297,313)

Custom finishes are available on request. Contact the CRL Technical Sales Shower Door Department.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Brushed Nickel Junior Prima 01 Series Top or Bottom Mount Hinge JRPPH01BN   Other Finishes Available

• Top or Bottom Mount

• For Use with 1/4" (6 mm) Glass

• Available in Several Beautiful Finishes

• 3 Year Warranty

• Use Monolithic Tempered Glass

• U.S. Patent 5,297,313

Advantages of CRL Junior Prima Hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Glass-to-Fixed Transom Mount Pivot Hinge is used for doors having fixed transoms above them. When placed vertically, either style can be used in movable transom installations. These Pivot Hinges are self-centering, with four springs for maximum retention strength. The JRPPH01 Model is adaptable to our Junior Header System. (must order JRHAB01 Junior Adaptor Block separately)

SENIOR PRIMA: Using two hinges with 1/2" (12 mm) tempered safety glass, the hinge will hold up to 145 lbs. (66 kg) with a maximum door width of 36" (914 mm).

JUNIOR PRIMA: Using two hinges with 1/4" (6 mm) tempered safety glass, the hinge will hold up to 62 lbs. (28 kg) with a maximum door width of 28" (711 mm).

SPECIFICATIONS:

Glass Thickness:

Senior Prima 1/2" (12 mm) Tempered Safety Glass

Junior Prima 1/4" (6 mm) Tempered Safety Glass

Special Feature: Top and Bottom Mount allows more glass exposure. Can also save on glass fabrication costs when compared to use of Side Mount Glass-to-Glass Hinges requiring more cut-outs.

Construction: Solid Brass

Hinge Swings: Full Rotation

Closing Type: Self-Centering when within 15° of closed position.

Cut-Out Required

Includes: Gaskets, Screws, and Glass Fabrication Dimensions

Senior and Junior Prima Hinges are patented (Patent No. 5,297,313).

Custom finishes are available on request. Contact the CRL Technical Sales Shower Door Department.

Product Warning:

CRL Shower Door Hinges are designed for residential or hotel shower use. If hinges are to be used for other than their intended purpose, approval must be obtained from the CRL Shower Door Technical Sales Department.

Use only the template included with this hinge. Cut-out dimensions for CRL hinges may not match those of other brands. 

CRL Brushed Nickel 6" Back-to-Back Solid Brass 3/4" Diameter Pull Handles with Metal Washers SPH6BBRZ     Other Finishes Available

• 3/4" (19 mm) Diameter Solid Brass

• Back-to-Back with Metal Washers

• Use 1/4" to 1/2" (6 to 12 mm) Monolithic Tempered Glass

These CRL Solid Brass Pull Handles offer a selection of Back-to-Back or Single-Sided styles, with a choice of an economical "No Washer" type, or the Traditional Style Pull with 1-1/4" (32 mm) diameter metal washers. The Back-to-Back Handle includes a pull for each side of the door, and is commonly used in frameless shower door applications. The Single-Sided, No Metal Washers Handle has a 1/8" (3 mm) protruding end cap, and is commonly used for bypassing cabinet and wardrobe doors. All Pull Handles are offered in a choice of 6" and 8" (152 and 203 mm) sizes, and are stocked in finishes to match most bathroom décors. Custom finishes are also available on special order.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: 3/4" (19 mm) Diameter Solid Brass Rod; 1-1/4" (32 mm) Diameter Washers/Stud Kit

Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm)

Hole Diameter Required: 1/2" (12 mm)

Center-to-Center Hole Spacing: 6" (152 mm); 8" (203 mm) 

CRL Polished Brass 6" Tubular Back-to-Back 3/4" Diameter Shower Door Pull Handles SDPR6BR        Other Finishes Available

• Fabricated from 3/4" (19 mm) Diameter Brass Tubing

• Fits 1/4" to 1/2" (6 to 12 mm) Thick Glass

• Available in Several Popular Sizes and Finishes

• Use 1/4" to 1/2" (6 to 12 mm) Monolithic Tempered Glass

These CRL Regular Style Shower Pulls are constructed of heavy wall brass tubing. Brass back-up washers and nylon spacer washers are included to protect against glass-to-metal contact. Consists of one pull for each side of the door. Available only in 6" (152 mm) size.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: 3/4" (19 mm) Diameter Brass Tubing (1.5 mil thick); 1-1/4" (32 mm) Diameter Washers

Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm)

Hole Diameter Required: 1/2" (12 mm)

Center-to-Center Hole Spacing: 6" (152 mm) 

CRL Matte Gun Metal 8" Back-to-Back Solid Brass 3/4" Diameter Pull Handles with Metal Washers SPH8MGM     Other Finishes Available

• 3/4" (19 mm) Diameter Solid Brass

• Use 1/4" to 1/2" (6 to 12 mm) Monolithic Tempered Glass

• Back-to-Back with Metal Washers

These CRL Solid Brass Pull Handles offer a selection of Back-to-Back or Single-Sided styles, with a choice of an economical "No Washer" type, or the Traditional Style Pull with 1-1/4" (32 mm) diameter metal washers. The Back-to-Back Handle includes a pull for each side of the door, and is commonly used in frameless shower door applications. The Single-Sided, No Metal Washers Handle has a 1/8" (3 mm) protruding end cap, and is commonly used for bypassing cabinet and wardrobe doors. All Pull Handles are offered in a choice of 6" and 8" (152 and 203 mm) sizes, and are stocked in finishes to match most bathroom décors. Custom finishes are also available on special order.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: 3/4" (19 mm) Diameter Solid Brass Rod; 1-1/4" (32 mm) Diameter Washers/Stud Kit

Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm)

Hole Diameter Required: 1/2" (12 mm)

Center-to-Center Hole Spacing: 6" (152 mm); 8" (203 mm) 

CRL Polished Stainless 8" BM Series Tubular Back-to-Back Pull Handle BM8X8PS  Other Finishes Available

• Our Most Popular Handle

• Decorative Metal Washers Also Serve to Cover Any Hole Defects in Glass

• Numerous Finish Choices in 6" and 8" (152 and 203 mm)

• Custom Finishes Available

• Heavy 3/4" (19 mm) Diameter Tubular Construction (1.5 mil Thick)

• Use Monolithic Tempered Glass

The CRL BM Series of Back-to-Back Tubular Pull Handles with Metal Washers are constructed of 1.5 mil thick heavy brass tubing. Decorative metal back-up washers are included, as well as plastic washers to protect against glass-to-metal contact. Consists of one pull for each side of the door (back-to-back), and come in 6" and 8" sizes.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: 3/4" (19 mm) Diameter Brass Tubing (1.5 mil thick); 1-1/4" (32 mm) Diameter Washers

Glass Thickness Range: 1/4" (6 mm) to 1/2" (12 mm)

Hole Diameter Required: 1/2" (12 mm)

Center-to-Center Hole Spacing: 6" (152 mm); 8" (203 mm)

Thread Size: 1/4"-20 

Stainless Steel Advisory:

Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish.

CRL Polished Chrome 6" Ladder Style Back-to-Back Pull Handle LP6X6CH        Other Finishes Available

• An Attractive Handle to Add Contrast to Decor

• Stocked in Popular 6" and 8" (152 and 203 mm) Sizes with a Diameter of 3/4" (19 mm)

• Several Stock Finishes, with Custom Finishes Available

• Use 5/16" to 1/2" (8 to 12 mm) Monolithic Tempered Glass

CRL Ladder Style Pulls say "notice me" when mounted to a heavy frameless shower enclosure. The extra height, when compared to typical shower door pull handles, makes for a unique appearance and contemporary design. Ladder Style Pull Handles are for back-to-back mounting using supplied through bolts on 5/16” or 1/2" (8 or 12 mm) thick glass.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: 3/4" (19 mm) Brass Tubing 6" and 8" (152 and 203 mm) Sizes; 1-1/4" (32 mm) Brass Tubing All Other Sizes

Glass Thickness Range: 5/16" (8 mm) to 1/2" (12 mm)

Hole Diameter Required: For 6" and 8" (152 and 203 mm) Handles: 1/2" (12 mm); For All Other Sizes: 5/8" (16 mm) 

CRL Satin Brass Square Ladder Pull 6" Back-to-Back SLP6X6SB       Other Finishes Available

• An Attractive Handle to Add Distinction

• Square Lines Complement Contemporary Hardware

• Stocked in Popular 6" and 8" (152 and 203 mm) Sizes and Features 3/4" (19 mm) Square Tubing

• Use 5/16" to 1/2" (8 to 12 mm) Monolithic Tempered Glass

CRL Ladder Style Pulls attract attention when mounted to a heavy frameless shower enclosure. The extra height, when compared to typical shower door pull handles, makes for a unique appearance and contemporary design. Ladder Style Pull Handles are for back-to-back mounting using supplied through-bolts on 5/16", 3/8" or 1/2" (8, 10 or 12 mm) thick glass. 

CRL Matte Black 8" Ladder Style Back-to-Back Pull Handles LP8X8MBL     Other Finishes Available

• An Attractive Handle to Add Contrast to Decor

• Stocked in Popular 6" and 8" (152 and 203 mm) Sizes with a Diameter of 3/4" (19 mm)

• Several Stock Finishes, with Custom Finishes Available

• Use 5/16" to 1/2" (8 to 12 mm) Monolithic Tempered Glass

CRL Ladder Style Pulls say "notice me" when mounted to a heavy frameless shower enclosure. The extra height, when compared to typical shower door pull handles, makes for a unique appearance and contemporary design. Ladder Style Pull Handles are for back-to-back mounting using supplied through bolts on 3/8" or 1/2" (10 or 12 mm) thick glass.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: 3/4" (19 mm) Brass Tubing 6" and 8" (152 and 203 mm) Sizes; 1-1/4" (32 mm) Brass Tubing All Other Sizes

Glass Thickness Range: 5/16" to 1/2" (8 to 12 mm)

Hole Diameter Required: For 6" and 8" (152 and 203 mm) Handles: 1/2" (12 mm); For All Other Sizes: 5/8" (16 mm) 

CRL Polished Nickel Square Ladder Pull 8" Back-to-Back SLP8X8PN       Other Finishes Available

• An Attractive Handle to Add Distinction

• Square Lines Complement Contemporary Hardware

• Stocked in Popular 6" and 8" (152 and 203 mm) Sizes and features 3/4" (19 mm) Square Tubing

• Use 5/16" to 1/2" (8 to 12 mm) Monolithic Tempered Glass

CRL Ladder Style Pulls attract attention when mounted to a heavy frameless shower enclosure. The extra height, when compared to typical shower door pull handles, makes for a unique appearance and contemporary design. Ladder Style Pull Handles are for back-to-back mounting using supplied through-bolts on 5/16" or 1/2" (8 or 12 mm) thick glass.

CRL Brushed Bronze 6" MT Series Round Tubing Mitered Corner Back-to-Back Pull Handle MT6X6BBRZ   Other Finishes Available

• An Attractive Handle to Add Contrast to Decor

• Stocked in Popular 6" and 8" (152 and 203 mm) Sizes

• Several Stock Finishes, with Custom Finishes Available

• Use 1/4" to 1/2" (6 to 12 mm) Monolithic Tempered Glass

The MT Series Round Tubing Mitered Corner Back-to-Back Pull Handles offers the contrast of round tubing along with square mitered corners, which makes it a Handle that is sure to be noticed. The round tubing provides a comfortable gripping surface and strong feel. Back-up plastic washers and nylon spacers are included to protect against glass-to-metal contact.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: 3/4" (19 mm) Brass Tubing; 1-1/4" (32 mm) Metal Washers

Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm)

Hole Diameter Required: 1/2" (12 mm)

Center-to-Center Hole Spacing: 6" (152 mm); 8" (203 mm) 

CRL Matte Black 8" MT Series Round Tubing Mitered Corner Back-to-Back Pull Handle MT8X8MBL     Other Finishes Available

• An Attractive Handle to Add Contrast to Decor

• Stocked in Popular 6" and 8" (152 and 203 mm) Sizes

• Several Stock Finishes, with Custom Finishes Available

• Use 1/4" to 1/2" (6 to 12 mm) Monolithic Tempered Glass

The MT Series Round Tubing Mitered Corner Back-to-Back Pull Handles offers the contrast of round tubing along with square mitered corners, which makes it a Handle that is sure to be noticed. The round tubing provides a comfortable gripping surface and strong feel. Back-up plastic washers and nylon spacers are included to protect against glass-to-metal contact.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: 3/4" (19 mm) Brass Tubing; 1-1/4" (32 mm) Metal Washers

Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm)

Hole Diameter Required: 1/2" (12 mm)

Center-to-Center Hole Spacing: 6" (152 mm); 8" (203 mm) 

CRL Brushed Nickel Or Polished Chrome 6" Crescent Style Back-to-Back Pull Handles Without Metal Washers CSH6X6BN

• Crescent or "Eyelet" Shaped Handle Stands Out From the Ordinary

• No Metal Washers Allow a Sleek Profile

• 3/4" (19 mm) Diameter Tubular Brass Construction (1.5 mil Thick)

• Two Standard Sizes to Choose From

• Several Stock Finishes, with Custom Finishes Upon Request

• Use 1/4" to 1/2" (6 to 12 mm) Monolithic Tempered Glass

The CRL Crescent Style Handle is formed from tubular brass. These Handles do not include metal washers, but plastic washers are included to protect against glass-to-metal contact.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: 3/4" (19 mm) Brass Tubing

Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm)

Hole Diameter Required: 1/2" (12 mm)

Center-to-Center Hole Spacing: 6" (152 mm); 8" (203 mm) 

CRL Oil Rubbed Bronze 8" Crescent Style Back-to-Back Pull Handles Without Metal Washers CSF8X8ORB   Other Finishes Available

• Crescent or "Eyelet" Shaped Handle Stands Out From the Ordinary

• No Metal Washers Allow a Sleek Profile

• 3/4" (19 mm) Diameter Tubular Brass Construction (1.5 mil Thick)

• Two Standard Sizes to Choose From

• Several Stock Finishes, with Custom Finishes Upon Request

• Use 1/4" to 1/2" (6 to 12 mm) Monolithic Tempered Glass

The CRL Crescent Style Handle is formed from tubular brass. These Handles do not include metal washers, but plastic washers are included to protect against glass-to-metal contact.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: 3/4" (19 mm) Brass Tubing

Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm)

Hole Diameter Required: 1/2" (12 mm)

Center-to-Center Hole Spacing: 6" (152 mm); 8" (203 mm) 

CRL Polished Nickel 6" Colonial Style Back-to-Back Pull Handles COL6X6PN      Other Finishes Available

• Unique Appearance with Multiple Contours and Fittings

• Integrated Brass Hardware

• Several Stock Finishes, with Custom Finishes Available

• Use 1/4" to 1/2" (6 to 12 mm) Monolithic Tempered Glass

The CRL Colonial Style Back-to-Back Pull Handle has a unique appearance and visual appeal. The multiple contours of the Handle, along with the numerous integrated brass hardware fittings, make this Handle one you will surely want to consider for a lasting impression of your modern frameless shower enclosure.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: 3/4" (19 mm) Brass Tubing

Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm)

Hole Diameter Required: 1/2" (12 mm)

Center-to-Center Hole Spacing: 6" or 8" (152 or 203 mm) 

CRL Matte Black 8" Colonial Style Back-to-Back Pull Handles COL8X8MBL   Other Finishes Available

• Unique Appearance with Multiple Contours and Fittings

• For 1/4" to 1/2" (6 to 12 mm) Monolithic Tempered Glass

• Integrated All Brass Hardware

• Several Stock Finishes, with Custom Finishes Available

The CRL Colonial Style Back-to-Back Pull Handle has a unique appearance and visual appeal. The multiple contours of the Handle, along with the numerous integrated brass hardware fittings, make this Handle one you will surely want to consider for a lasting impression of your modern frameless shower enclosure.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: 3/4" (19 mm) Brass Tubing

Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm)

Hole Diameter Required: 1/2" (12 mm)

Center-to-Center Hole Spacing: 6" or 8" (152 or 203 mm) 

CRL Polished Brass 6" Victorian Style Back-to-Back Pull Handle V1C6X6BR    Other Finishes Available

• Eye-Catching Appeal with a Contoured Appearance

• Made of Solid Brass

• Available in Several Beautiful Finishes

• Use 1/4" to 1/2" (6 to 12 mm) Monolithic Tempered Glass

This CRL Victorian Style Handle will bring elegance and a unique look to a frameless shower door. The vertical sides of the Handle have a thick middle portion for solid gripping and strong feel, then taper to a thinner, sleeker look culminating in stylish and handsome knuckles. Metal washers provide the finishing touch, along with plastic washers to protect against glass-to-metal contact.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: Solid Brass; 1-1/4" (32 mm) Diameter Washers

Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm)

Hole Diameter Required: 1/2" (12 mm)

Center-to-Center Hole Spacing: 6" (152 mm); 8" (203 mm) 

CRL Satin Brass 8" Victorian Style Back-to-Back Pull Handle V1C8X8SB      Other Finishes Available

• Eye-Catching Appeal with a Contoured Appearance

• Made of Solid Brass

• Available in Several Beautiful Finishes

• Use 1/4" to 1/2" (6 to 12 mm) Monolithic Tempered Glass

This CRL Victorian Style Handle will bring elegance and a unique look to a frameless shower door. The vertical sides of the Handle have a thick middle portion for solid gripping and strong feel, then taper to a thinner, sleeker look culminating in stylish and handsome knuckles. Metal washers provide the finishing touch, along with plastic washers to protect against glass-to-metal contact.

Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the décor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special.

SPECIFICATIONS:

Material: Solid Brass; 1-1/4" (32 mm) Diameter Washers

Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm)

Hole Diameter Required: 1/2" (12 mm)

Center-to-Center Hole Spacing: 6" (152 mm); 8" (203 mm) 

CRL Matte Black 48" Hollow Premium Handle U-Style HPH48UMBL     Other Finishes Available

• Sleek minimalistic design

• Matching 24” towel bars

• Back-to-back installation for 3/8”

• No visible mounting hardware

• Suitable for sliding and swinging door applications

• Stainless steel all-welded construction

• Perfectly complements CRL Premium Shower Sliders

Inspired by the Premium Shower Sliders, the ultra-sleek and modern line of CRL Premium Handles and matching Premium Towel Bars create a unique and refreshing experience with an unprecedented, coordinated design inside and around the shower.

The U-Style’s refined rectangular profile has been designed particularly for pivoting shower doors, drawing inspiration from the Cavoli Shower Slider. It integrates sophisticated back-to-back mounting with concealed hardware. Its floating appearance offers aesthetic elegance and durability.

CRL Brushed Stainless Steel 60" Hollow Premium Handle U-Style HPH60UBS      Other Finishes Available

• Sleek minimalistic design

• Matching 24” towel bars

• Back-to-back installation for 3/8”

• No visible mounting hardware

• Suitable for sliding and swinging door applications

• Stainless steel all-welded construction

• Perfectly complements CRL Premium Shower Sliders

Inspired by the Premium Shower Sliders, the ultra-sleek and modern line of CRL Premium Handles and matching Premium Towel Bars create a unique and refreshing experience with an unprecedented, coordinated design inside and around the shower.

The U-Style’s refined rectangular profile has been designed particularly for pivoting shower doors, drawing inspiration from the Cavoli Shower Slider. It integrates sophisticated back-to-back mounting with concealed hardware. Its floating appearance offers aesthetic elegance and durability.

Stainless Steel Advisory:

Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish.

CRL Satin Brass 48" Hollow Premium Handle C-Style HPH48CSB       Other Finishes Available

• Sleek minimalistic design

• Matching 24” towel bars

• Back-to-back installation for 3/8”

• No visible mounting hardware

• Suitable for sliding and swinging door applications

• Stainless steel all-welded construction

• Perfectly complements CRL Premium Shower Sliders

Inspired by the Premium Shower Sliders, the ultra-sleek and modern line of CRL Premium Handles and matching Premium Towel Bars create a unique and refreshing experience with an unprecedented, coordinated design both inside and around the shower.

Inspired by the Colonia-Shower Slider, the C-Style Handle is designed with a tube profile and features back-to-back mounting with concealed hardware for a seamless appearance.

Brass Finish Advisory:

Although durable, brass is prone to oxidation. It can give brass and brass finishes a tarnished look, regardless of how the hardware is initially packaged or stored.

CRL Brushed Stainless Steel 60" Hollow Premium Handle C-Style HPH60CBS       Other Finishes Available

• Sleek minimalistic design

• Matching 24” towel bars

  • Back-to-back installation for 3/8”No visible mounting hardware

  • Suitable for sliding and swinging door applications

  • Stainless steel all-welded construction

  • Perfectly complements CRL Premium Shower Sliders

Inspired by the Premium Shower Sliders, the ultra-sleek and modern line of CRL Premium Handles and matching Premium Towel Bars create a unique and refreshing experience with an unprecedented, coordinated design both inside and around the shower.

Inspired by the Colonia-Shower Slider, the C-Style Handle is designed with a tube profile and features back-to-back mounting with concealed hardware for a seamless appearance.

Stainless Steel Advisory:

Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish.

CRL Translucent Vinyl Edge 'T' Wipe for 7/16" Maximum Gap without Tape

• Now Available With or Without Pre-Applied Clear Very Hi-Bond Tape

• Can Be Used On in or Out-Swinging Doors

• Suggested Gap: 7/16" (11 mm)

• Use Monolithic Tempered Glass

Our CRL Translucent 'T' Shaped Edge Wipe SDTW can be used on in or out-swinging doors. Leg Closes gaps up to 7/16" (11 mm), and can be trimmed for smaller gaps. Adhere 5/16" (8 mm) rigid base to either glass edge or wall using our Clear Very Hi-Bond Tape. 

CRL Translucent Vinyl Edge 'T' Wipe for 7/16" Maximum Gap with Pre-Applied Tape

• Now Available With or Without Pre-Applied Clear Very Hi-Bond Tape

• Can Be Used On in or Out-Swinging Doors

• Suggested Gap: 7/16" (11 mm)

• Use Monolithic Tempered Glass

Our CRL Translucent 'T' Shaped Edge Wipe SDTWT2 can be used on in or out-swinging doors. Leg Closes gaps up to 7/16" (11 mm), and can be trimmed for smaller gaps. Adhere 5/16" (8 mm) rigid base to either glass edge or wall using our Clear Very Hi-Bond Tape. 

CRL Geneva 037 Series Wall Mount Full Back Plate Standard Hing