Hardware

Window channel balance- Each FA Series Sash Balances requires one of several types of nylon guides to be riveted onto the top and bottom of the channel. Customers can mount the guides using Cat. No. H3740 Rivet Set Tool (sold separately), which mushrooms the rivet, giving it a very strong set.

Window Channel Balance

Each FA Series Sash Balances requires one of several types of nylon guides to be riveted onto the top and bottom of the channel. Customers can mount the guides using Cat. No. H3740 Rivet Set Tool (sold separately), which mushrooms the rivet, giving it a very strong set.

Window Channel Balance Repair Kit- This  window channel balance repair kit is designed to be used with window channel balances. The top and bottom guides being replaced should match the dimensions and profiles of those pictured on this page to insure the proper replacement of the window channel balance. This kit, along with the window channel balance, gives you everything you need for the replacement.

Window Balance Repair Kit

Window Channel Balance Repair Kit- This  window channel balance repair kit is designed to be used with window channel balances. The top and bottom guides being replaced should match the dimensions and profiles of those pictured on this page to insure the proper replacement of the window channel balance. This kit, along with the window channel balance, gives you everything you need for the replacement.

Window Balance Rivet Installation Tool

This hard steel Rivet Installation Tool has a flared conical shaped head to properly flare sash balance guide rivets. It is used when replacing the rivets on the top and bottom guides of window channel balances. 

Dormakaba® Overhead Concealed Closer has dual action and non-critical valves for control adjustments of both closing and latching speed independent of each other. Each closer body comes packaged with mounting clips, templates, and instructions.

Dormakaba® Overhead Concealed Closer

Dormakaba® (Dorma) Overhead Concealed Closer has dual action and non-critical valves for control adjustments of both closing and latching speed independent of each other. Each closer body comes packaged with mounting clips, templates, and instructions.

The Dormakaba® BTS80 Series Floor Mounted Door Closers offer adaptability to almost any installation. The Dormakaba® Closer's compact body permits its use where a larger door closer would be prohibitive. The universal, non-handed design uses a system of interchangeable spindles, and will allow one basic door closer mechanism to be used for either single or double acting, center-hung or offset applications while accommodating virtually any floor covering or threshold height. The selective, multi-point hold open or variable delayed action feature makes this one of the most versatile door closers available. Accessories such as Cover Plates, Pivots, Center-Hung and Offset Arms are also available.

Dormakaba® BTS80 Series Floor Mounted Door Closer

The Dormakaba® (Dorma) BTS80 Series Floor Mounted Door Closers offer adaptability to almost any installation. The Dormakaba® Closer's compact body permits its use where a larger door closer would be prohibitive. The universal, non-handed design uses a system of interchangeable spindles, and will allow one basic door closer mechanism to be used for either single or double acting, center-hung or offset applications while accommodating virtually any floor covering or threshold height. The selective, multi-point hold open or variable delayed action feature makes this one of the most versatile door closers available. Accessories such as Cover Plates, Pivots, Center-Hung and Offset Arms are also available.


This DORMAKABA® Floor Closer Cover Plate is for use with the BTS80 Series Floor Mounted Closer. These cover plates are available in four popular finishes, and allow for full closer adjustment without removing the door.

DORMAKABA® Floor Closer Cover Plate 


This DORMAKABA®(Dorma) Floor Closer Cover Plate is for use with the BTS80 Series Floor Mounted Closer. These cover plates are available in four popular finishes, and allow for full closer adjustment without removing the door.


LCN 4040 Series Surface Door Closer is designed for institutional and other rugged high traffic applications. This closer has been tested to ten million cycles and is certified to ANSI Standard A156.4 Grade 1. The closer is an adjustable multi-spring size 1 – 6 that can accommodate interior doors up to 60" (1.52 m) and exterior doors up to 48" (1.22 m). The closer is fully reversible and shipped complete with a parallel arm bracket permitting universal installation for regular, top-jamb, or parallel arm configuration as needed for the job. Optional accessories, such as Drop Plates and Hold Open Arms, are available for special installations.

LCN 4040 Series Surface Door Closer

LCN 4040 Series Surface Door Closer is designed for institutional and other rugged high traffic applications. This closer has been tested to ten million cycles and is certified to ANSI Standard A156.4 Grade 1. The closer is an adjustable multi-spring size 1 – 6 that can accommodate interior doors up to 60" (1.52 m) and exterior doors up to 48" (1.22 m). The closer is fully reversible and shipped complete with a parallel arm bracket permitting universal installation for regular, top-jamb, or parallel arm configuration as needed for the job. Optional accessories, such as Drop Plates and Hold Open Arms, are available for special installations.

Chisel End Stick Tool- has been one of our most popular items. Caulkers use them for tooling freshly applied sealants; glaziers find them useful for pushing vinyl into window channels; painters use them as mixing sticks; and autoglass installers use them for setting or removing glass from rubber gaskets. Stick Tools are made of a special high strength, flexible plastic formula that won’t scratch adjoining glass or metal and makes them easy to clean.

Chisel End Stick Tool

Chisel End Stick Tool- has been one of our most popular items. Caulkers use them for tooling freshly applied sealants; glaziers find them useful for pushing vinyl into window channels; painters use them as mixing sticks; and autoglass installers use them for setting or removing glass from rubber gaskets. Stick Tools are made of a special high strength, flexible plastic formula that won’t scratch adjoining glass or metal and makes them easy to clean.

The IR Von Duprin® 33A Series Rim Panic Exit Device is designed with a grooved case and is intended to fit door stiles as narrow as 1-3/4" (44 mm). This device features the "quiet One"® technology which eliminates most noise associated with Exit Devices and is manufactured to the highest standard of quality. All 33A and 35A Series Exit Devices are UL Listed for Panic Exit Hardware, and are tested in accordance to ANSI A156.3, Grade 1 standards

Von Duprin® 33A Series Rim Panic Exit Device

The IR Von Duprin® 33A Series Rim Panic Exit Device is designed with a grooved case and is intended to fit door stiles as narrow as 1-3/4" (44 mm). This device features the "quiet One"® technology which eliminates most noise associated with Exit Devices and is manufactured to the highest standard of quality. All 33A and 35A Series Exit Devices are UL Listed for Panic Exit Hardware, and are tested in accordance to ANSI A156.3, Grade 1 standards.

 Heavy-Duty Ball Bearing Wheel Assembly Display Case- This ball bearing roller unit is fabricated in a stamped steel housing which press-fits into the bottom of the H-Bar. For sliding glass panels fabricated with up to 15 square feet of 1/4" (6 mm) plate glass or other glazing material. For larger panels up to a maximum size of 15 square feet, four each D649 ball bearing steel rollers should be used

Display Case Wheel Assembly

 Heavy-Duty Ball Bearing Wheel Assembly Display Case- This ball bearing roller unit is fabricated in a stamped steel housing which press-fits into the bottom of the H-Bar. For sliding glass panels fabricated with up to 15 square feet of 1/4" (6 mm) plate glass or other glazing material. For larger panels up to a maximum size of 15 square feet, four each D649 ball bearing steel rollers should be used

Black Plastic Top Guide 1/4" Glass- glass center the door glass securely in the Upper Channel, which prevents rattling and excessive side-to-side movement. Press-fit holds Guide snugly in position. The 7/8" (22 mm) long Guides snap easily onto the top of the glass doors. A minimum of two Guides are required for each door.

Plastic Top Guide 1/4" Glass

Black Plastic Top Guide 1/4" Glass- glass center the door glass securely in the Upper Channel, which prevents rattling and excessive side-to-side movement. Press-fit holds Guide snugly in position. The 7/8" (22 mm) long Guides snap easily onto the top of the glass doors. A minimum of two Guides are required for each door.

Rim Cylinder Lock

This Rim Cylinder comes with two keys in the Schlage® 'C' keyway configuration. Available keyed randomly or alike in two different finishes. 1-7/8" (47.6 mm) breakaway screws and 1-1/4" (31.7 mm) breakaway spindle. 

Aluminum Mortise Thumbturn Cylinder

The Mortise Thumbturn Cylinder is used to activate the lock without the need for a key. 1-5/32" (29 mm) diameter, 1" (25 mm) long 5-Pin Cylinder. Diecast zinc construction. Includes a 3/16" (4.8 mm) cylinder ring. Other cylinder ring sizes and styles available.